Smart-UPS VT 20kVA 400V w/2 Batt Mod Start-Up 5X8 Int Maint Bypass Parallel Capable

 

American Power Conversion
Not in stock
€ 8.487,03
€ 10.269,30 incl 21% VAT
APC Smart-UPS VT, 16 kW / 20 kVA, Input 400V 3PH / Output 230V, 400V 3PH, Interface Port DB-9 RS-232, Smart-Slot, Extended runtime model.

Includes: Battery modules ship installed, Bolt down brackets, CD with software, Installation guide, Network Management Card, Smart UPS signalling RS-232 cable, Start up included, User Manual.

- Parallel-capacity capable
Increases total power capacity by using multiple UPSs simultaneously.
- Parallel-redundant capable
Power the connected equipment with multiple UPSs to increase system redundancy.

Availability
- Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
- Scalable runtime
Allows additional run time to be quickly added as needed.
- Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
- Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS overload condition or fault.
- Battery modules connected in parallel
Delivers higher availability through redundant batteries.

Serviceability
- User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
- Battery replacement without tools
Allows quick, easy battery replacement.
- Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Shippable with modules installed
Enables pre-installation UPS staging and testing and faster installation.
- Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.

Manageability
- Network manageable
Provides remote management of the UPS over the network.
- InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
- LCD display
Alpha-Numeric Display which displays system parameters and alarms.
- Audible alarms
Provides notification of changing utility power and UPS conditions.
- Programmable frequency
Ensures compatibility with different input frequencies.
- LED status indicators
Quickly understand unit and power status with visual indicators.
- SmartSlot
Customize UPS capabilities with management cards.

Total Cost of Ownership
- Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
- Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
- Manual maintenance bypass
Reduces installation costs by eliminating the need for an external mechanical bypass.
- Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Protection
- Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
- Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.
- Cold-start capable
Provides temporary battery power when the utility power is out.

Specification

Product
Product id 287482
Brand American Power Conversion
Partnr SUVTP20KH2B2S
EAN/UPC code 731304257189
Warranty (months) 1 year repair or replace, Start-Up Service
Power
Replacement battery cartridge 2
Input frequency 40/70 Hz
Features
Output power capacity 20 VA
Output power 16000 W
Maximum current 27 A
Emergency Power Off (EPO) Y
Noise level 64 dB
Battery
Battery technology Sealed Lead Acid (VRLA)
Battery recharge time 5 uur
Design
Product colour Black
Certification C-tick, CE, EN 50091-2, EN/IEC 62040-3, IEC 61000-3-2, IEC 61000-3-3, ISO 14001, ISO 9001, VFI-SS-112
Operational conditions
Operating temperature (T-T) 0 - 40 °C
Storage temperature (T-T) -15 - 45 °C
Operating relative humidity (H-H) 0 - 95 procent
Storage relative humidity (H-H) 0 - 95 procent
Operating altitude 0 - 999.9 m
Non-operating altitude 0 - 15000 m
Packaging data
Package weight 428180 g
Weight & dimensions
Weight 396820 g
Logistics data
Quantity per pallet 1 stuk(s)
Other features
Battery type VRLA
Output connections 1 x Hard Wire 4-wire (3PH + G) 1 x Hard Wire 5-wire (3PH + N + G) 1 x Screw Terminals
Input connection type Hard Wire 5-wire (3PH + N + G)
Dimensions (WxDxH) 356 x 812 x 1499 mm
Nominal input voltage 400 V
Package dimensions (WxDxH) 650 x 1062 x 1643 mm