Our ruggedized IS230 Industrial managed Switches provide enduring performance in harsh environments, such as those found in outdoor IoT, transportation and industrial applications.

The Allied Telesis IS230 Series is a multipurpose product line of managed layer 2 switches ideal for industrial applications, including manufacturing, rail transportation (telecommunication and signaling), road transportation (traffic control), and Smart Cities.

With fanless operation and a wide operating temperature range of -40° to 75°C, the robust IS230 Series easily tolerates harsh and demanding environments, such as those found in industrial and outdoor deployments.

An integrated voltage regulator ensures the PoE output voltage always stays at the rated value, regardless of any fluctuations in the input voltage of powered devices. An extended input voltage range makes the IS230 Series ideal for deployment in traffic control cabinets.

Network resiliency
The IS230 Series supports highly stable and reliable network switching. You can customize the IS230 with X-Ring protocol to prevent network connection failure. X-Ring protocol recovers network faults within 20ms. It supports couple-ring, dual-ring and dual-homing network topologies. Dual-homing is available even if the other network is running a different ring protection protocol such as
RSTP or STP.

Securing the Network Edge
Ensuring data protection means controlling network access. Protocols such as IEEE 802.1X port-based authentication guarantee that only known users are connected to the network. Unknown users who physically connect can be segregated into a pre-determined part of the network. This offers network guests Internet access, while ensuring the integrity of private network data.

Quality of Service
Comprehensive wire-speed QoS provides flow-based traffic management with Port/Tag Base and Type of Service prioritization. Bandwidth control limits ingress/egress traffic and broadcast/multicast/flooded unicast packets.

Gigabit and Fast Ethernet
The IS230 Series offers combo ports supporting both Gigabit and Fast Ethernet Small Form-Factor Pluggables (SFPs). Support for both SFP types allows organizations to stay within budget even as they migrate to faster technologies.

Configurable power budget
On PoE-sourcing IS230 switches, all LAN ports source POE+ up to 30W.
You can configure both the overall power budget and the power feeding limit on a per-port basis, to establish a close relationship between the power sourcing feature and the real capabilities of the external Power Supply Unit (PSU).

Dual power inputs
The IS230 Series provides redundant power inputs for higher system reliability; the power inputs are protected against reverse polarity and over-current.

The integrated voltage regulator allows a wide input voltage range and ensures the PoE output voltage always stays at the rated value, regardless the fluctuation on input voltage.

ECO friendly
The IS230 Series are Energy Efficient Ethernet (EEE) devices. They facilitate power saving by switching off parts of the LAN that are not transmitting or recieving data. This sophisticated feature can significantly reduce operating costs, by reducing the power requirements of the switch and any associated cooling equipment.

Specification

Product
Product id	629325
Brand	Allied Telesis
Partnr	AT-IS230-10GP-80
EAN/UPC code	767035215259
Warranty (months)	5 years
Data transmission
MAC address table	8000 entries
Switching capacity	20 Gbit/s
Forwarding rate	14.88 Mpps
Number of queues	8
Jumbo frames support	Y
Jumbo frames	9000
Packet buffer memory	4 MB
Network
Networking standards	IEEE 802.1AX, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.2, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ac, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
10G support	N
Copper ethernet cabling technology	1000BASE-T
Port mirroring	Y
Full duplex	Y
Flow control support	Y
Spanning tree protocol	Y
Link aggregation	Y
VLAN support	Y
Virtual LAN features	Multicast VLAN, Stacked VLAN, Tagged VLAN
Number of VLANs	4094
Management features
Switch type	Managed
Switch layer	L2
Quality of Service (QoS) support	Y
MIB support	RFC 1212, RFC 1213, RFC 1239, RFC 2819, RFC 2863, RFC 3418, RFC 4022, RFC 4113
Protocols
GARP VLAN Registration Protocol (GVRP)	Y
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity	8
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Combo SFP ports quantity	2
Fiber optic connector	SFP
Security
DHCP features	DHCP relay
IGMP snooping	Y
Security algorithms	3DES, 802.1x RADIUS, DES, RSA, SHA-1, SNMP, SNMPv3, SSH, SSH-2, SSL/TLS
SSH/SSL support	Y
Loop protection	Y
Authentication	Port-based authentication
Weight & dimensions
Width	74 mm
Depth	105 mm
Height	152 mm
Weight	1200 g
Power
DC input voltage	24 - 48 V
Power consumption (max)	139.3 W
Optical fiber
Fiber ethernet cabling technology	100BASE-X, 1000BASE-X
Multicast features
Multicast support	Y
Design
Rack mounting	N
Product colour	Black
Housing material	Metal
LED indicators	Y
DIN rail mounting	Y
Wall mountable	Y
International Protection (IP) code	IP30
Safety	CSA C22.2 No. 61010-2-201, IEC60950-1, UL60950-1, UL61010-2-201
Electromagnetic compatibility	AS/NZS CISPR 32, A; EN55024; EN55032, A; EN61000-6-2; EN61000-6-4, A; FCC 15B, A; ICES-003, 6, A; VCCI, A
Certification	CE, FCC, RCM, TUV, VCCI, RoHS, WEEE
Operational conditions
Operating altitude	0 - 3000 m
Heat dissipation	475.3 BTU/h
Storage temperature (T-T)	-40 - 85 °C
Storage relative humidity (H-H)	10 - 95 procent
Operating temperature (T-T)	-40 - 75 °C
Operating relative humidity (H-H)	10 - 95 procent
Performance
Buffer size	512 KB
Harmonized System (HS) code	8517.62.0050
Power over Ethernet (PoE)
Power over Ethernet (PoE)	Y
Power over Ethernet (PoE) ports quantity	8
Power over Ethernet plus (PoE+) ports quantity	4
Power over Ethernet (PoE) power per port	30 W
Total Power over Ethernet (PoE) budget	120 W