20 x 100/1000-T PoE+ - 4x 100/1000-T PoE+ (multi-giga is not supported)- 4x SFP+ Ports- L3 Stackable Switch- EU Power Cord

 

Allied Telesis
Not in stock
€ 3.206,33
€ 3.879,65 incl 21% VAT
The Allied Telesis x530 Series of stackable Multi-Gigabit Layer 3 switches feature high capacity, resiliency and easy management, making them the ideal choice for demanding distribution and high-speed connectivity applications.

Allied Telesis x530 Series switches are a high-performing and feature-rich choice for today’s networks. They offer a versatile solution for enterprise applications. With 20 x 10M/100M/1Gigabit ports, 4 x 100M/1/2.5/5 Gigabit ports, and 10 Gigabit uplinks, plus the power of Allied Telesis Virtual Chassis Stacking (VCStack™), the x530 Series can connect anything from a small workgroup to a large business.

Powerful network management
Allied Telesis Autonomous Management Framework™ (AMF) automates many everyday tasks including configuration management, easing the workload of modern networks. The entire network can be managed as a single virtual device with powerful centralized features. Growing the network can be accomplished with plug-and-play simplicity, and network node recovery is fully zero-touch.

AMF secure mode increases network security with management traffic encryption, authorization, and monitoring. AMF Guestnode allows third party devices, such as IP phones and security cameras, to be part of an AMF network.

Network resiliency
Today’s converging online services means there is increasing demand for highly-available networks with minimal downtime. VCStack™, in conjunction with link aggregation, provides a network with no single point of failure and application resiliency.

x530 Series switches can form a VCStack of up to four units for enhanced resiliency and simplified device management. Long Distance Stacking (VCStack LD), which enables stacks to be created over long distance fiber links, makes the x530 Series the perfect choice for distributed environments too.

Allied Telesis Ethernet Protection Switched Ring (EPSRing™), and the standards-based G.8032 Ethernet Ring Protection, ensure that distributed network segments have high-speed, resilient access to online resources and applications.

Reliable
The x530 Series was designed with reliability in mind, and guarantees continual delivery of essential services. With dual built-in power supplies and near-hitless online stack reconfiguration, maintenance may be performed without affecting network uptime.

Secure
A secure network environment is guaranteed. The x530 Series offers powerful control over network traffic types, secure management options, loop guard to protect against cabling mistakes, and tri-authentication for comprehensive access control.

Future proof
The x530 Series ensures a future-proof network, with superior flexibility and the ability to stack multiple units. All x530 Series models feature 10 Gigabit uplink ports and a comprehensive IPv6 feature set, to ensure they are ready for future network traffic demands.

High-speed wireless
The spread of high-speed wireless (802.11ac or “Wave2”) can be problematic for network infrastructure. Unless infrastructure is upgraded to cope with increased speeds, a bottleneck occurs which negatively impacts the effectiveness of the wireless network. However, increasing speeds from 1 Gigabit has traditionally meant moving to 10 Gigabit, which requires expensive new cabling. The x530 series solves this issue, because it provides support for both 2.5 and 5 Gigabit. At these speeds, the wireless network runs at full capacity, and there is no need to upgrade existing Cat5e and Cat6/6A cables.

Environmentally friendly
The x530 Series support Energy Efficient Ethernet (EEE), automatically reducing the power consumed by the switch whenever there is no traffic on a port. This sophisticated feature significantly lowers operating costs by reducing the power requirements of the switch and any associated cooling equipment.

Specification

Product
Product id 660635
Brand Allied Telesis
Partnr AT-X530-28GPXM-50
EAN/UPC code 767035212883
Warranty (months) 2 + 3 year
Data transmission
MAC address table 16000 entries
Switching capacity 160 Gbit/s
Forwarding rate 119 Mpps
Latency (10-100 Mbps) 7.38 µs
Latency (1 Gbps) 4.05 µs
Latency (10 Gbps) 1.63 µs
Number of queues 8
Jumbo frames support Y
Jumbo frames 10000
Packet buffer memory 1.5 MB
Network
Networking standards IEEE 802.2, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
10G support Y
Copper ethernet cabling technology 10GBASE-T
Cable types supported Cat5e, Cat6, Cat6a
Port mirroring Y
Policy-based routing Y
Flow control support Y
Auto-negotiation Y
Spanning tree protocol Y
Link aggregation Y
VLAN support Y
Virtual LAN features VLAN Identifier ( VLAN ID)
Management features
Switch type Managed
Switch layer L3
Quality of Service (QoS) support Y
Web-based management Y
Configuring Location Settings (CLI) Y
Traffic classification Y
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity 24
Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)
Fast Ethernet (copper) ports quantity 4
Gigabit Ethernet (copper) ports quantity 20
SFP+ module slots quantity 4
USB 2.0 ports quantity 1
Power connector AC-in jack
Security
DHCP features DHCP client, DHCP relay, DHCP server, DHCP snooping, DHCPv6 relay
Access Control List (ACL) Y
IGMP snooping Y
Authentication type IEEE 802.1x
Security algorithms 802.1x RADIUS, SSH, SSH-2, SSL/TLS
MAC address filtering Y
Loop protection Y
BPDU filtering/protection Y
Authentication MAC-based authentication, Port-based authentication, Web-based authentication
Password protection Y
Weight & dimensions
Width 441 mm
Depth 421 mm
Height 44 mm
Weight 6300 g
Packaging data
Package weight 8300 g
Package width 563 mm
Package depth 534 mm
Package height 128 mm
Power
Power consumption (max) 900 W
Optical fiber
Fiber ethernet cabling technology 100BASE-X, 1000BASE-X
Wavelength 850 nm
Multicast features
Multicast support Y
Design
Rack mounting Y
Stackable Y
Form factor 1U
Product colour Grey
LED indicators Y
Electromagnetic compatibility EN55032 class A, FCC class A, VCCI class A, ICES-003 class A
Certification UL, cUL, UL60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950-1, EN60825-1, AS/NZS 60950.1
Operational conditions
Operating altitude 0 - 3048 m
Storage temperature (T-T) -25 - 70 °C
Storage relative humidity (H-H) 5 - 95 procent
Operating temperature (T-T) 0 - 50 °C
Operating relative humidity (H-H) 5 - 90 procent
Performance
Physical stacking (units) 4
Memory type DDR3-SDRAM
Internal memory 1000 MB
Flash memory 256 MB
Noise level 44 dB
Harmonized System (HS) code 8517.62.0050
Power over Ethernet (PoE)
Power over Ethernet (PoE) Y
Power over Ethernet (PoE) ports quantity 24
Power over Ethernet plus (PoE+) ports quantity 24
Power over Ethernet (PoE) power per port 30 W
Total Power over Ethernet (PoE) budget 720 W