- Supports high-bandwidth applications with the 802.11n standard; backward compatible with 802.11b and g devices
- Connects to Power over Ethernet devices, simplifying installation and eliminating the need for and cost of installing external power supplies
- Protects business information with enhanced security, including rogue access point detection, advanced encryption, and select access filters
- Simplifies installation and configuration with easy-to-use web interface

With the growth of high-bandwidth applications, such as storage and video, in the workplace, network performance is essential. Wireless technology is no longer lagging behind wired performance. The Cisco® WAP4410N Wireless-N Access Point answers the growing business need for access, speed, and security.

The Cisco Wireless-N Access Point lets you connect Wireless-N (802.11n), Wireless-G (802.11g), and Wireless-B (802.11b) devices to your wired network, so you can add PCs to the network with no cabling hassle. Power over Ethernet (PoE) support makes the access point easy to install - you can mount it anywhere, even without ready access to a power plug. With appropriate PoE support at the other end, you need to run only one cable to the access point to deliver both data and power. Of course, you can also use the included AC adapter if power is available nearby.

Moreover, the integrated quality of service (QoS) features provide consistent voice and video quality on both the wired and wireless networks, enabling the deployment of business-quality voice over IP (VoIP) and video applications.

To protect your data and privacy, the Cisco Wireless-N Access Point supports the industrial-strength wireless security of Wi-Fi Protected Access (WPA), encoding all your wireless transmissions with powerful encryption. The MAC address filter lets you decide exactly who has access to your wireless network, and advanced logging keeps you apprised of access attempts.

The rogue access point detection capability notifies the administrator when an unauthorized access point is detected in the airspace. The WPS (Wi-Fi Protected Setup) feature facilitates simple and secure deployment of security in the wireless network. Configuration is a snap with the web browser-based configuration utility.
The Cisco WAP4410N Wireless-N Access Point is the best way to add wireless access to your existing business network.

Specification

Product
Product id	254191
Brand	Cisco Systems
Partnr	WAP4410N-G5
EAN/UPC code	4260039347170
Data transmission
Supported data transfer rates	10/11/54/100/300 Mbit/s
Management features
Web-based management	Y
Certificates
Compliance industry standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Features
Maximum data transfer rate	300 Mbit/s
Bandwidth	2.4 GHz
Cabling technology	10Base-T/100Base-TX
Spread spectrum method	DSSS
Quality of Service (QoS) support	Y
Security
Security algorithms	64-bit WEP, WPA, WPA, WPA, WPA-PSK, WPA2-PSK
Authentication method	SSID, BSSID
Protocols
DHCP client	Y
Management protocols	SNMP 1, SNMP 2c, HTTP, HTTPS
Ports & interfaces
Ethernet LAN (RJ-45) ports	1
DC-in jack	Y
Power
Power over Ethernet (PoE)	Y
Power requirements	12 V DC
Design
Internal	N
Antenna
Antenna gain level (max)	2 dBi
Performance
Compatible operating systems	Linux
Operational conditions
Operating relative humidity (H-H)	10 - 85 procent
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-20 - 70 °C
Storage relative humidity (H-H)	5 - 95 procent
Weight & dimensions
Dimensions (WxDxH)	170 x 41 x 170 mm
Weight	390 g
Connectivity LEDs	Y