Overview
HP 1910 switches are advanced smart managed fixed-configuration Gigabit Ethernet lite Layer 3 switches designed for small businesses looking for key enhanced features in an easy-to-administer solution. The series has eight models: 8-, 16-, 24-, and 48-port 10/100/1000 non-PoE models; and two 8-port and two 24-port 10/100/1000 PoE models. All series switches have additional true Gigabit SFP ports for fiber connectivity. HP 1910 models support rack mounting or desktop operation and use variable-speed fans for quiet operation. The HP 1910 switches operate at full wirespeed, IPv6, supporting QoS traffic prioritization and security features such as 802.1X network login, access control lists, and denial-of-service prevention. Customizable features include VLANs and link aggregation trunking as well as advanced features such as Layer 3 static routing and Spanning Tree Protocols (STP, RSTP, and MSTP). The HP 1910 switches come with a lifetime warranty covering unit, fans, and power supplies

Features

Quality of Service (QoS)
Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic

Management
Simple Web management: intuitive Web GUI (http/https) allows for easy management of device by even nontechnical users

Connectivity
Auto-MDI/MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports

Performance
Half-/Full-duplex auto-negotiating capability on every port: doubles the throughput of every port

Resiliency and high availability
Redundant power supply (365W PWR model only): RPS power supply provides additional PoE budget of up to 740W for high power applications like Gigabit Ethernet IntelliJack switches; the HP RPS 1600 power supply (JG136A) is sold separately

Layer 2 switching
VLAN support and tagging: supports IEEE 802.1Q (4, 094 VLAN IDs) and 256 VLANs simultaneously

Layer 3 services
Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network.

Specification

Product
Product id	384958
Brand	Hewlett Packard Enterprise
Partnr	JG350A/ABB
EAN/UPC code	886112619626
Warranty (months)	Warranty: Lifetime, advance replacement, next business day, phone support
Data transmission
MAC address table	8192 entries
Maximum data transfer rate	1 Gbit/s
Supported data transfer rates	10/100/1000Mbps
Switching capacity	18 Gbit/s
Throughput	13400000 p/s Mpps
Packet buffer memory	0.5 MB
Network
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
10G support	N
Routing entries	32
Flow control support	Y
Auto MDI/MDI-X	Y
Spanning tree protocol	Y
Link aggregation	Y
VLAN support	Y
Number of VLANs	4094
Management features
Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Y
Web-based management	Y
Protocols
Management protocols	SNMP
Supported network protocols	LLDP, STP
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity	10, 8, 10
SFP slots quantity	2
Security
MAC address filtering	Y
Weight & dimensions
Width	300 mm
Depth	260 mm
Height	43.6 mm
Weight	3000 g
Power
AC input voltage	100-240 V
AC input frequency	50/60 Hz
Power consumption (typical)	228 W
Design
Rack mounting	Y
Stackable	Y
Product colour	Grey
LED indicators	Y
Safety	UL, IEC, EN, CAN/CSA
Certification	FCC, VCCI, CISPR, ICES
Operational conditions
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 procent
Performance
Built-in processor	ARM
Processor frequency	333 MHz
Internal memory	128 MB
Flash memory	128 MB
Power over Ethernet (PoE)
Power over Ethernet (PoE)	Y
Other features
Latency	100/1000Mb < 5 µs