ProLiant BL20p p-Class p-Class server blade

Overview     Standard Features (Server Blade)
Standard Features (Server Blade Enclosure and Interconnects)
Standard Features (Power System and Rack Information)
Standard Features      Models     Options     Memory     TechSpecs

QuickSpecs

ProLiant BL20p
p-Class server blade

What's New

Performance dual processor server blade designed with enterprise availability

ProLiant BL20p Server Blade includes:

IntelÒ PentiumÒ III FC-PGA2
1.40 GHz processor (dual capability)

ServerWorks HE- SuperLite Chipset

512-MB or 1024-MB PC133-MHz Registered ECC SDRAM memory, (2 x 1 Interleaved Memory), expandable to 4 GB

Three NC3163 Fast Ethernet Embedded WOL (Wake On LAN) NICs standard

Two NICs are upgradable to 10/100/1000T using the Dual Gigabit Ethernet NC7780 NIC option kit

One additional 10/100 port dedicated to Integrated Lights-Out (iLO) Management

Smart Array 5i Controller with optional battery-backed write cache

Wide Ultra3 SCSI Drive Cage standard supports up to two 1² Wide Ultra3 or Ultra 320 hot plug hard drives

Integrated Lights-Out (iLO) Advanced Management (ASIC on motherboard)

Plugs vertically into 6U enclosure

Up to 48 BL20p blades fit in 42U rack

ProLiant BL p-Class Server Blade Enclosure:

Server blades and interconnects blind mate into server blade enclosures for network connection and power

Server blade enclosure is 6U and holds up to 8 ProLiant BL20p server blades and 2 interconnects

2 types of interconnects available:
interconnect switches or patch panels

ProLiant BL p-Class Power Enclosure:

Use BL p-Class sizing tool to determine power based on your configuration

http://activeanswers.compaq.com/configurator/calc/BL%20p-Class.XLS
BL p-Class power enclosure provides shared, external, redundant power

Power enclosure is 3U and holds up to 6 hot-plug power supplies

Choose single-phase or three-phase power

BL p-Class power enclosure with power supplies not needed if using facility
-48VDC ± 10% in this case purchase DC option kit

ProLiant BL p-Class Power Distribution:

Distributes power from the power enclosure to the server blade enclosures

Three power distribution choices:

BL p-Class scalable bus bar

BL p-Class mini bus bar

BL p-Class power bus box

BL p-Class server blade, server blade enclosure, interconnects and power enclosure protected by a limited three year warranty with optional service uplifts available

NOTE: Power requirements for a ProLiant BL p-Class system: 200V - 240V AC, 30 amp or facility DC -48V ± 10%.

Configuration Steps

For a complete configuration of the ProLiant BL20p, do the following:

Select BL p-Class server blades:

Single Intel Pentium III 1.40 GHz processor, 512-MB ECC SDRAM
(2 X 256MB) (230040-B21)
or
Two Intel Pentium III 1.40 GHz processors, 1-GB ECC SDRAM (2 X 512MB) (257959-B21) (Not offered in NA)
(NOTE: Additional options include processors, memory, and Gb NIC.)
PLUS

Decide how many BL p-Class Server Blade Enclosures to purchase (each enclosure can hold up to 8 ProLiant BL20p server blades):

BL p-Class server blade enclosure with 8 Rapid Deployment Pack licenses
(281404-B21)
or
BL p-Class server blade enclosure with Rapid Deployment Pack trial (243564-B21)
PLUS

Select an Interconnect. Interconnects are sold in pairs. One pair of Interconnects is required with each BL p-Class server blade enclosure:

BL p-Class RJ-45 Patch panel
(with 32 RJ-45 connectors) (230766-B21)
or
BL p-Class RJ-45 Patch panel 2
(with Fibre Channel pass through and 32 RJ-45 connectors) (306465-B21)
NOTE: Fibre Channel connectivity is not available on the BL20p.
or
ProLiant BL p-Class C-GbE Interconnect Kit (with 4 RJ-45 10/100/1000 T/TX/T and 4 RJ-45 10/100 T/TX uplink connectors)
(249655-B21)
or
ProLiant BL p-Class F-GbE Interconnect Kit (with 4 LC 1000 SX and 4 RJ-45 10/100 T/TX uplink connectors)
(279720-B21)
PLUS

Select BL p-Class power enclosure and power supplies based on configuration. Use p-Class sizing tool to help determine power configuration: http://activeanswers.compaq.com/configurator/calc/BL%20p-Class.XLS

NOTE: Power enclosures and supplies are not needed if using facility DC (-48V ± 10%).
Single phase power enclosure with four hot-plug power supplies (NA/JPN- 239162-001) (Single-phase power enclosure holds a max of four power supplies; no need to order additional power supplies with this option kit) (INTL - 239162-421)
or
Three-phase power enclosure with six hot-plug power supplies (NA/JPN- 230769-001) (INTL - 230769-421) (Three-phase power enclosure holds a max of six power supplies no need to order additional power supplies with this option kit)
(Power enclosures and power supplies can also be purchased separately see options list for part numbers)
PLUS

Select power distribution: Scalable bus bar - Supports up to 5 server blade enclosures (240560-B21)
or
Mini bus bar – Supports up to 3 server blade enclosures (240559-B21)
or
Power Bus Box - connects 1 power enclosure to 1 server blade enclosure (240562-B21)

Standard Features
(Server Blade)

ProLiant BL20p Server Blade
Processor	Intel Pentium III FC-PGA2 processor 1.40 GHz

Upgradability	Upgradable to dual processing

Cache Memory	512-KB Level 2 Cache

Chipset	ServerWorks HE- SuperLite Chipset NOTE: For more information regarding ServerWorks, please see the following URL: http://www.serverworks.com/products/overview.html.

Memory	Standard	512MB PC133-MHz Registered ECC SDRAM DIMM Memory (2 X 256 MB) (1 processor model)
	Maximum	4096 MB
	Standard	1024MB PC133-MHz Registered ECC SDRAM DIMM Memory (2 x 512 MB) (2 processor model – not available in NA)
	Maximum	4096 MB
	NOTE: Memory must be installed in pairs.

Network Controller	Four NICs total:
	Three NC3163 Fast Ethernet NIC PCI 10/100 with full WOL (Wake On LAN), one with PXE support
	One 10/100 iLO NIC dedicated to management
	Two NICs are upgradable to 10/100/1000T using the Dual Gigabit Ethernet NC7780 NIC option kit

Manageability	Integrated Lights-Out (iLO) Management Advanced (ASIC on the System Board)

Internal Storage	Hard Drives	None ship standard
	Maximum Internal Storage	145.6 GB (internal drive cage) (2 x 72.8 GB Ultra320, 1² drives)

Expansion Slots	No PCI slots all features are integrated

Product Demo	To view the Product Demo, please see the following URL, then click on ² PRODUCT DEMO² : http://www5.compaq.com/products/servers/proliant-bl/p-class/index.html

ProLiant BL p-Class Server Blade Enclosure and Interconnects
ProLiant BL p-Class Server Blade Enclosure	6U (10.5-inch), 19-inch wide
	Holds up to 8 ProLiant BL20p servers blades
	10 bays per server blade enclosure 8 bays for server blades 2 outside bays for interconnect modules (RJ-45 patch panels or GbE interconnect switches)
	Server blades blind mate into the server blade enclosure backplane for power and data connections
	Up to 6 BL p-Class 6U server blade enclosures fit in a 42U rack
	Server blade management module attached to the back of each BL p-Class 6U server blade enclosure to report events all servers and provide asset and inventory information

ProLiant BL p-Class Power Requirements	Redundant 200V - 240V AC, 30 amp single-phase for NA and International Redundant 208V 30amp 3-phase 4 wire, NA Redundant 380 - 415V 20A 3-phase 5 wire, Intl Redundant -48VDC ± 10%

Standard Features
(Server Blade Enclosure and Interconnects)

ProLiant BL p-Class Interconnect Switch Option (Two switches per kit) (Every BL p-Class server blade enclosure requires two Interconnect switches OR two RJ-45 patch panels)	Provides up to a 32 to 1 server networking cable reduction per server enclosure. Each interconnect switch (two per enclosure) reduces sixteen 10/100 Base-T/Base-TX server network ports to four uplinks ports (eight uplinks total). Only one to all eight uplinks may be used per enclosure. The ProLiant BL p-Class F-GbE Interconnect Kit includes two GbE interconnect switches and two DualTSX Interconnect Modules that provide four (4) LC 1000 SX and four (4) RJ-45 10/100 T/TX uplink ports per server enclosure. The ProLiant BL p-Class C-GbE Interconnect Kit includes two GbE interconnect switches and two QuadT Interconnect Modules that provide four (4) RJ-45 10/100/1000 T/TX/T and four (4) RJ-45 10/100 T/TX uplink ports per server enclosure. Also included (per Interconnect Switch): Two (2) RJ-45 10/100 T/TX front panel ports for management or additional uplinks One (1) RS-232 DB-9 front panel out-of-band management port Redundant 10/100 cross links ports connecting the two Interconnect Switches Redundant power and cooling inputs Hot-plug and hot- remove with configuration retention capability Power ON, management, and per port status and speed LED indicators Reset/power momentary push-button switch ProLiant BL Interconnect Switch Management Utilities and User Documentation CD Fully pre-configured for rapid deployment and immediate operation ProLiant BL Interconnect Switch Management System and Utilities: Full featured web-based interface, menu-driven console interface, Telnet, SNMP-based scripting utility and example scripts, SNMP and RMON MIBs, BootP and DHCP client, port mirroring, QoS packet prioritization, IGMP multicasting, and TFTP server utilities for management of interconnect switch

ProLiant BL p-Class RJ-45 patch panel and Patch Panel 2 (Two patch panels per kit) (Every BL p-Class server blade enclosure requires two Interconnect switches OR two RJ-45 patch panels)	6U (10.5-inch), Plugs into BL p-Class 6U server blade enclosures
	Used to pass NIC signals from all server blades in server blade enclosure out as RJ-45 connections
	Supports Gigabit Ethernet network controllers
	16 RJ-45 connectors on the back of each BL p-Class 6U RJ-45 patch panel (32 RJ-45 connections per server blade enclosure) NOTE: The BL20p does not have Fibre Channel functionality. Although the RJ-45 Patch Panel 2 can be used for Ethernet pass through.

Required Network Cabling	10Base-T Categories 3, 4 or 5 UTP (100 meters) EIA/TIA-568 100-ohm STP (100 meters) 100Base-TX Category 5 UTP (100 meters) EIA/TIA-568 100-ohm STP (100 meters) 1000Base-T Category 5 UTP (100 meters) EIA/TIA-568 100-ohm STP (100 meters) 1000Base-SX 50/125 µm Multimode Fiber, 400 MHz/Km (500 meters) 50/125 µm Multimode Fiber, 500 MHz/Km (550 meters) 62.5/125 µm Multimode Fiber, 160 MHz/Km (220 meters) 62.5/125 µm Multimode Fiber, 200 MHz/Km (275 meters) NOTE: For cabling information, refer to the Web site at: http://www.compaq.com/products/servers/.

Standard Features
(Power System and Rack Information)

ProLiant BL p-Class Power System and Rack Information	NOTE: To determine power configuration please refer to the ProLiant BL p-Class Overview and Planning Whitepaper and sizing tool, please see the following URL: http://h18000.www1.hp.com/products/servers/proliant-bl/ p-class/20p/documentation.html

ProLiant BL p-Class Power Enclosure	3U (5.25-inch), 19-inch wide, 29-inch deep (0.48-meter wide, 0.74-meter deep), Dual input single phase and three phase models available
ProLiant BL p-Class Power Enclosure	BL p-Class power enclosure provides external, shared hot-plug power. Each three-phase power enclosure houses up to six hot-plug power supplies each single-phase power enclosures hold up to four hot-plug power supplies to power the BL p-Class server blades and interconnects Please use the sizing utility to determine the power needed for each configuration. http://activeanswers.compaq.com/configurator/calc/BL%20p-Class.XLS
	Power enclosures and power supplies are not needed if using facility DC (-48V DC ± 10%). If using facility DC, only Facility DC Power Connection kit part number (240563-B21) is needed.

BL p-Class Power Distribution	In the ProLiant BL p-Class infrastructure, redundant -48 VDC power (from the power enclosures or facility DC power) is distributed from the power enclosures to the server blade enclosures through the bus bar system. Hinges attach the ProLiant BL bus bars to the rails in a rack. The bus bars swing open from the center to enable easy rear access to the server blades and network cables. Power is distributed redundantly through independent A- and B-sided bus bars.
	Three different power distribution solutions are available depending on the maximum number of server blade enclosures planned for the rack: ProLiant BL p-Class scalable bus bar ProLiant BL p-Class mini bus bar NOTE: To support a full 42U rack of BL20p server blades (6 server blade enclosures), two mini bus bars are needed. ProLiant BL p-Class power bus box

	Power Enclosures Supported	Server Blade Enclosures Supported	Max. Rack Space Occupied
Scalable Bus Bar	1 or 2	= 5	36U
Mini Bus Bar	1	= 3	21U
Power Bus Box	1	1	9U

Required Power Source

Two 30amp redundant power feeds per power enclosure
Connectors
–NEMA receptacles (NA/Japan)
NA 1-phase L6-30, 250v, 30A 3-wire
NA 3-phase L15-30, 250V, 30A, 4-wire
–IEC 309 Pin & Sleeve connectors (International)
Intl 1-phase 250V, 32A, 3- pin (2 pole + ground)
Intl 3-phase 380-415V, 32A, 5--pin (4 pole + ground)
Optimized for power cabling from bottom and network cabling from top
For cabling information, refer to the Compaq Web site at
http://www.compaq.com/products/servers/

Standard Features

ProLiant Essentials Foundation Pack Software	Optional ProLiant Essentials Value Packs	Optional software offerings that selectively extend the functionality of an Adaptive Infrastructure to address specific business problems and needs: Rapid Deployment Pack – an automated solution for multi-server deployment and provisioning, enabling companies to quickly and easily adapt to changing business demands. Workload Management Pack – provides easier management of complex environments, improving overall server utilization and enabling WindowsÒ 2000 customers for the first time to confidently deploy multiple applications on a single multiprocessor ProLiant Server. Integrated Lights-Out Advanced Pack - The BL20p includes the advance version of the Integrated Lights-Out which includes graphical console and virtual media.
	Insight Manager™ 7	Insight Manager 7 helps maximize system uptime and performance and reduces the cost of maintaining the IT infrastructure by providing proactive notification of problems before those problems result in costly downtime and reduced productivity. Insight Manager 7 is easy to set up and provides rapid access to detailed fault and performance information gathered by the Management Agents. One-click-access to the Remote Insight Lights Out Edition board allows systems administrators to take full graphical control of ProLiant servers in remote locations or lights-out data centers. Finally, Insight Manager 7 in concert with the Version Control Agents and Version Control Repository Manager enables systems administrators to version manage and update system software across groups of ProLiant servers.
	Management Agents	The Management Agents form the foundation for HP’s Intelligent Manageability strategy. They provide direct, browser-based access to in-depth instrumentation built into HP servers, workstations, desktops, and portables, and send alerts to Insight Manager 7 and other enterprise management applications in case of subsystem or environmental failures. For additional information about the Management Agents and other management products from HP, please visit the management website at http://www.hp.com/servers/manage
	ActiveUpdate	ActiveUpdate is a web-based application that keep IT managers directly connected to HP for proactive notification and delivery of the latest software updates.
	ROMPaq, support software, and configuration utilities	The latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options.
	Survey Utility and diagnostics utilities	The most advanced configuration analysis, reporting and troubleshooting utilities used by HP and at your fingertips.
	Health Driver	Health Drivers interface with the Integrated Lights-Out ASIC to provide system management support, including monitoring of server components, event logging and support for the Compaq Insight Management Agents.
	iLO Management Interface Driver	The iLO Management Interface Driver provides access to the iLO management processor for Insight Management Agents. This interface is used to provide SNMP alert forwarding and management agent integration.
		NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://www.hp.com/servers/proliantessentials.

OS Support	MicrosoftÒ Windows 2000 Server and Advanced Server LINUXÒ (Red HatÒ and SuSEÒ) Microsoft .NETä Server NOTE: For a more complete and up-to-date listing of supported OS’s and versions, please visit our OS Support Matrix at: ftp://ftp.compaq.com/pub/products/servers/os-support-matrix-310.pdf. NOTE: For an up-to-date listing of the latest drivers available for the ProLiant BL p-Class, please see: http://www.compaq.com/support/files/server/us/index.html.

Intelligent Manageability	Integrated Lights-Out Advanced (iLO) Virtual Text and Graphical Remote Console * Virtual Floppy * Virtual Power Button Control Dedicated LAN Connectivity Automatic IP Configuration via DHCP/DNS/WINS Industry Standard 128-bit Secure Sockets Layer (SSL) Security IML and iLO Event Logging Support for 12 user accounts with customizable access privileges Automatic Server Recovery-2 (ASR-2) Insight Manager 7 Redundant ROM Remote Flash ROM ROM Based Setup Utility (RBSU) Advanced Configuration and Power Interface Specification Ready (ACPI) Server Health Logs Redundant Power Supply Utility Pre-Failure Warranty (covers processors, as well as hard drives and memory) Interconnect Switch Management System and Utilities (interconnect switch option) Integrated Management Log (IML) Hot Spare Boot (NOTE: Upon the event of a failed processor or VRM in a multi-processing environment, the system will automatically reboot and use the remaining good processor(s).) Dynamic sector repairing and drive parameter tracking (with Smart Array controllers) Redundant/adaptive load balancing NIC Support * Advanced features such as Graphical Remote Console and Virtual Floppy are included with the BL p-Class server.

Availability	Power redundancy: Redundant AC feeds into power enclosures, redundant DC feeds from power enclosure to server blade enclosures, 1 + 1 redundant power supplies Two hot-plug SCSI hard drive bays and integrated RAID (Smart Array 5i) on every server blade (Battery-backed write cache is optional.) Redundant ROM on each server blade ECC Memory Interconnects Switch Availability Hot-plug and hot- remove with configuration retention capability Two network connections per server blade bay (four NICs total) routed to two redundant interconnect switches Redundant inter-switch communication with two sets of redundant uplink ports per each interconnect switch IEEE 802.1D Spanning tree protocol support for loop-free path redundancy Static IEEE 802.3ad (EtherChannel compatible) trunking with automatic port load balancing Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load balancing)

Security	Power-on password Administrator's password Integrated Lights-Out has 12 customizable user accounts and SSL encryption Integrated Lights-Out can be disabled via a Global Setting Interconnect Switch multilevel user names and passwords and management interface time out period setting Up to 64 Port-based IEEE 802.1Q tagged VLANs per interconnect switch

Minimum Rack Requirements	Mounts in Compaq/HP, Telco racks and Third Party racks that meet the following criteria: Compatible with 19-inch Standard EIA rail sets EIA rail-to-rail depth is 29 - 30² Cabinet depth must be at least 36-inch deep overall (Additional min. 3.5-inch clearance from rear RETMA rail to rear door, inclusive in the 36-inch overall depth) Ample room for top and bottom cable egress (approximately 8 square inches for full rack configuration with patch panel) Must be capable of supporting 1600 lb (for full rack configuration) Perforated front and rear doors to accommodate front-to-back cooling Must have 65% open perforation on server blade enclosure doors to support airflow requirements Optimized for use with the HP 10000 Series racks NOTE: If using HP 7000 Series rack, Rack Extension Kit and High Air Flow Rack Door options are required.

Rack Airflow Requirements	Rack 9000 and 10000 series Cabinets The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The Compaq 9000 Series Rack and the HP 10000 Series Racks provides enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors. Rack 7000 series Cabinets When installing a server with processors running at speeds of 550 MHz or greater in Compaq Rack 7000 series racks with glass doors (165753-001 (42U), and 163747-001 (22U)), the new processor technology requires the installation of the High Airflow Rack Door Inserts (327281-B21 (42U), 327281-B22 (42U 6 pack), or 157847-B21 (22U)) to promote enhanced airflow for maximum cooling. CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment: Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation). Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm). CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.
	NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the server, or to the server documentation located in the Support section at the following URL: http://www5.compaq.com/products/servers/proliantdl380/index.html.

Service and Support	HP Services provides a three-year, limited warranty, including Pre-Failure Warranty (coverage of hard drives, memory and processors) fully supported by a worldwide network of resellers and service providers. HP technical assistance is available 7x24, toll free in the United States and Canada. Telephone support services may be covered under warranty or available for an additional fee. NOTE: Sever Blade Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. NOTE: Server Blade Enclosure and Interconnects Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. A full range of CarePaq? packaged hardware and software services: Installation and start up Extended coverage hours and enhanced response times System management and performance services Availability and recovery services NOTE: For more information, customer/resellers can contact http://www.compaq.com/services. Please see the following URL regarding Warranty Information For Your HP Products: http://www.compaq.com/support/warranty_upgrades/ web_statements/176738.html For additional information regarding Worldwide Limited Warranty and Technical Support, please see the following URL: ftp://ftp.compaq.com/pub/supportinformation/ejourney/176738.pdf.
	NOTE: Certain restrictions and exclusions apply. Consult the Customer Support Center at 1-800-345-1518 for details.

Models

ProLiant BL20p P1400-512KB, 512MB (1P) 230040-B21	Processor(s)	(1) Intel Pentium III 1.40 GHz standard (up to 2 supported)
	Cache Memory	512-KB Level 2 writeback per processor
	Memory	512 MB (Standard) (2 X 256MB) to 4096 MB PC133-MHz Registered ECC SDRAM DIMM Memory
	Network Controller	Three NC3163 Fast Ethernet NIC PCI 10/100 with full WOL (Wake On LAN); one NIC has PXE support One additional 10/100 port dedicated to iLO Management
	Storage Controller	Smart Array 5i Controller (integrated on system board)
	Hard Drives	None ship standard
	Internal Storage	Up to 145.6-GB maximum (with optional hard drives)
	Optical Drive	None
	Form Factor	Plugs vertically into ProLiant BL p-Class Server Blade Enclosure

ProLiant BL20p P1400-512KB, 1GB (2P) 257959-B21	Processor(s)	(2) Intel Pentium III 1.40 GHz standard (up to 2 supported)
	Cache Memory	512-KB Level 2 writeback per processor
	Memory	1024 MB (Standard) (2 X 512MB) to 4096 MB PC133-MHz Registered ECC SDRAM DIMM Memory
*Not available in North America.	Network Controller	Three NC3163 Fast Ethernet NIC PCI 10/100 with full WOL (Wake On LAN); one NIC has PXE support One additional 10/100 port dedicated to iLO Management
	Storage Controller	Smart Array 5i Controller (integrated on system board)
	Hard Drives	None ship standard
	Internal Storage	Up to 145.6-GB maximum (with optional hard drives)
	Optical Drive	None
	Form Factor	Plugs vertically into ProLiant BL p-Class Server Blade Enclosure

Options

ProLiant BL20p Unique Options	Dual NC7780 Gigabit Upgrade Module for ProLiant BL20p		230255-B21
	NOTE: The Dual NC7780 Gigabit Upgrade Module replaces two of the standard NC3163 Fast Ethernet Embedded WOL (Wake On LAN) NICs to two 10/10/1000T NC7780 NICs. NOTE: The GbE Interconnect Switch options support server NIC speeds to 100 Mbps. It is recommended that the patch panel be used with the Dual NC7780 Gigabit Upgrade Module if server NIC speeds to 1000 Mbps are required.
	ProLiant BL p-Class Server Blade Enclosure (ProLiant Essentials Rapid Deployment Pack Trial)		243564-B21
	ProLiant BL p-Class Server Blade Enclosure (8 ProLiant Essentials Rapid Deployment Pack Licenses)		281404-B21
	ProLiant BL p-Class RJ-45 Patch panel (pair) NOTE: Only one interconnect kit required per server blade enclosure.		230766-B21
	ProLiant BL p-Class RJ-45 Patch panel 2 (pair) NOTE: The BL20p does not have Fibre Channel functionality but the RJ-45 Patch Panel 2 can be used for Ethernet pass through NOTE: Only one interconnect kit required per server blade enclosure.	306465-B21
	ProLiant BL p-Class C-GbE Interconnect Kit (with pair of GbE Interconnect Switches and two QuadT Interconnect Modules) NOTE: Only one interconnect kit required per server blade enclosure. NOTE: To meet applicable radio frequency (RF) emission limits, the sidewall panels on the ends of any individual rack or a series of coupled racks and the front and rear doors must be installed in any racks containing more than one ProLiant BL p-Class GbE Interconnect Kit.	249655-B21
	ProLiant BL p-Class F-GbE Interconnect Kit (with pair of GbE Interconnect Switches and two DualTSX Interconnect Modules) NOTE: Only one interconnect kit required per server blade enclosure. NOTE: To meet applicable radio frequency (RF) emission limits, the sidewall panels on the ends of any individual rack or a series of coupled racks and the front and rear doors must be installed in any racks containing more than one ProLiant BL p-Class GbE Interconnect Kit.	279720-B21
	Single Phase Redundant Power Enclosure with 4 power supplies (NA/JPN) (Single Phase Power Enclosure holds a maximum of 4 power supplies; no need to order additional power supplies with this option kit)	239162-001
	Single Phase Redundant Power Enclosure with 4 power supplies (Int'l) (Single Phase Power Enclosure holds a maximum of 4 power supplies; no need to order additional power supplies with this option kit)	239162-421
	3 Phase Redundant Power Enclosure with 6 power supplies (NA/JPN) (3 Phase Power Enclosure holds a maximum of 4 power supplies; no need to order additional power supplies with this option kit)	230769-001
	3 Phase Redundant Power Enclosure with 6 power supplies (Int'l) (3 Phase Power Enclosure holds a maximum of 4 power supplies; no need to order additional power supplies with this option kit)	230769-421
	Single Phase Power Enclosure (empty) (NA/JPN) (Holds up to 4 power supplies; power supplies are not included in this kit)	231710-001
	Single Phase Power Enclosure (empty) (Int'l) (Holds up to 4 power supplies; power supplies are not included in this kit)	231710-421
	3 Phase Power Enclosure (empty) (NA/JPN) (Holds up to 6 power supplies; power supplies are not included in this kit)	231709-001
	3 Phase Power Enclosure (empty) (Int'l) (Holds up to 6 power supplies; power supplies are not included in this kit)	231709-421
	Single Power Supply	239161-B21
	Facility DC Power Connection	240563-B21
	ProLiant p-Class Scalable Bus Bar	240560-B21
	ProLiant p-Class Mini Bus Bar	240559-B21
	ProLiant p-Class Bus Power Box	240562-B21

ProLiant Essentials Value Pack Software	Rapid Deployment Pack, 10 User, V1.x NOTE: This license allows 10 servers to be managed and deployed via the Deployment Server. NOTE: Not necessary if you purchase the server blade enclosure with 8 Rapid Deployment Pack licenses 281404-B21.	269817-B21
	Rapid Deployment Pack, 10 User, V1.x (Japan) NOTE: This license allows 10 servers to be managed and deployed via the Deployment Server. NOTE: Not necessary if you purchase the server blade enclosure with 8 Rapid Deployment Pack licenses 281404-B21.	269817-291
	Rapid Deployment Pack, 1 User, V1.x NOTE: This license allows 1 server to be managed and deployed via the Deployment Server. NOTE: Not necessary if you purchase the server blade enclosure with 8 Rapid Deployment Pack licenses 281404-B21.	267196-B21
	Rapid Deployment Pack, 1 User, V1.x (Japan) NOTE: This license allows 1 server to be managed and deployed via the Deployment Server. NOTE ote: Not necessary if you purchase the server blade enclosure with 8 Rapid Deployment Pack licenses 281404-B21.	267196-291
	ProLiant Essentials Workload Management Pack (Featuring Resource Partitioning Manager version 2.0)	303284-B21
	NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://www.hp.com/servers/proliantessentials NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to URL http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product uickSpecs for more information. NOTE: These Web sites are available in English only.

Processor	Pentium lll P1400-512KB Processor Option Kit	234277-B21

Memory (SDRAM DIMMs)	2048 MB PC133MHz Registered ECC SDRAM Memory Kit (2x1024 MB)	201695-B21
	1024 MB PC133MHz Registered ECC SDRAM Memory Kit (2x512 MB)	201694-B21
	512 MB PC133MHz Registered ECC SDRAM Memory Kit (2x256 MB)	201693-B21
	256 MB PC133MHz Registered ECC SDRAM Memory Kit (2x128 MB)	201692-B21

Hard Drives	Ultra 320 SCSI – Universal Hot Plug
	36.4GB 10,000 rpm, U320 Universal Hard Drive, 1²	286713-B22
	72.8GB 10,000 rpm, U320 Universal Hard Drive, 1²	286714-B22
	18.2GB 15,000 rpm, U320 Universal Hard Drive, 1²	286775-B22
	36.4GB 15,000 rpm, U320 Universal Hard Drive, 1²	286776-B22
	72.8GB 15,000 rpm, U320 Universal Hard Drive, 1²	286778-B22
	NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds.

NOTE: Please see the Wide Ultra320 Universal Hot Plug QuickSpecs for additional technical information on the hard drives Support details, please see the following:
http://www5.compaq.com/products/quickspecs/11531_div/
11531_div.HTML (Division/World Wide)
http://www5.compaq.com/products/quickspecs/11531_na/
11531_na.HTML (North America)


Storage Controllers	Battery Backed Write Cache Enabler Option Kit	255514-B21
	Battery Backed Write Cache Enabler Option Kit (Japan)	255514-291

NOTE: Please see the following Controller QuickSpecs for Technical Specifications such as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported, SCSI Peak Data Transfer Rate, Channels, SCSI Ports, Drives supported, Cache, RAID support, and additional information:
http://www5.compaq.com/products/quickspecs/11063_div/
11063_div.HTML (Smart Array 5I)


Communications	Dual NC7780 Gigabit Upgrade Module for ProLiant BL20p	230255-B21
	NOTE: The Dual NC7780 Gigabit Upgrade Module replaces two of the standard NC3163 Fast Ethernet Embedded WOL (Wake On LAN) NICs to two 10/10/1000T NC7780 NICs. NOTE: The GbE Interconnect Switch options support server NIC speeds to 100 Mbps. It is recommended that the patch panel be used with the Dual NC7780 Gigabit Upgrade Module if server NIC speeds to 1000 Mbps are required.

BL p-Class Server Blade Enclosures	ProLiant BL p-Class Server Blade Enclosure (ProLiant Essentials Rapid Deployment Pack Trial)	243564-B21
	ProLiant BL p-Class Server Blade Enclosure (8 ProLiant Essentials Rapid Deployment Pack Licenses)	281404-B21

BL p-Class Interconnects	ProLiant BL p-Class RJ-45 Patch panel (pair) NOTE: Only one interconnect kit required per server blade enclosure.	230766-B21
	ProLiant BL p-Class RJ-45 Patch panel 2 (pair) NOTE: The BL20p does not have Fibre Channel functionality but the RJ-45 Patch Panel 2 can be used for Ethernet pass through NOTE: Only one interconnect kit required per server blade enclosure.	306465-B21
	ProLiant BL p-Class C-GbE Interconnect Kit (with pair of GbE Interconnect Switches and two QuadT Interconnect Modules) NOTE: Only one interconnect kit required per server blade enclosure. NOTE: To meet applicable radio frequency (RF) emission limits, the sidewall panels on the ends of any individual rack or a series of coupled racks and the front and rear doors must be installed in any racks containing more than one ProLiant BL p-Class GbE Interconnect Kit.	249655-B21
	ProLiant BL p-Class F-GbE Interconnect Kit (with pair of GbE Interconnect Switches and two DualTSX Interconnect Modules) NOTE: Only one interconnect kit required per server blade enclosure. NOTE:To meet applicable radio frequency (RF) emission limits, the sidewall panels on the ends of any individual rack or a series of coupled racks and the front and rear doors must be installed in any racks containing more than one ProLiant BL p-Class GbE Interconnect Kit.	279720-B21

BL p-Class Power options

NOTE: Use p-Class sizing tool to help determine power configuration:
http://activeanswers.compaq.com/configurator/calc/BL%20p-Class.XLS

	Single Phase Redundant Power Enclosure with 4 power supplies (NA/JPN) (Single Phase Power Enclosure holds a maximum of 4 power supplies; no need to order additional power supplies with this option kit)	239162-001
	Single Phase Redundant Power Enclosure with 4 power supplies (Int'l) (Single Phase Power Enclosure holds a maximum of 4 power supplies; no need to order additional power supplies with this option kit)	239162-421
	3 Phase Redundant Power Enclosure with 6 power supplies (NA/JPN) (3 Phase Power Enclosure holds a maximum of 4 power supplies; no need to order additional power supplies with this option kit)	230769-001
	3 Phase Redundant Power Enclosure with 6 power supplies (Int'l) (3 Phase Power Enclosure holds a maximum of 4 power supplies; no need to order additional power supplies with this option kit)	230769-421
	Single Phase Power Enclosure (empty) (NA/JPN) (Holds up to 4 power supplies; power supplies are not included in this kit)	231710-001
	Single Phase Power Enclosure (empty) (Int'l) (Holds up to 4 power supplies; power supplies are not included in this kit)	231710-421

	3 Phase Power Enclosure (empty) (NA/JPN) (Holds up to 6 power supplies; power supplies are not included in this kit)	231709-001
	3 Phase Power Enclosure (empty) (Int'l) (Holds up to 6 power supplies; power supplies are not included in this kit)	231709-421
	Single Power Supply	239161-B21
	Facility DC Power Connection	240563-B21

Power Distribution	ProLiant p-Class Scalable Bus Bar	240560-B21
	ProLiant p-Class Mini Bus Bar	240559-B21
	ProLiant p-Class Bus Power Box	240562-B21

Diagnostic Options	ProLiant p-Class Diagnostic Station NOTE: The Diagnostic Station allows access to the ProLiant BL20p server blade and the BL p-Class interconnect switch outside of the server enclosure. The option provides power and a data interface so that "offline" upgrade and diagnostic functions may be performed.	230743-B21

HP Rack 10000 Series (Graphite Metallic)	HP Rack 10842 (42U) – Pallet	257415-B21
HP Rack 10000 Series (Graphite Metallic)	HP Rack 10842 (42U) – Shock Pallet	257415-B22
	HP Rack 10647 (47U) – Pallet	245160-B21
	HP Rack 10647 (47U) – Crated	245160-B23
	HP Rack 10642 (42U) – Pallet	245161-B21
	HP Rack 10642 (42U) – Shock Pallet	245161-B22
	HP Rack 10642 (42U) – Crated	245161-B23
	HP Rack 10636 (36U) – Pallet	245162-B21
	HP Rack 10636 (36U) – Shock Pallet	245162-B22
	HP Rack 10636 (36U) – Crated	245162-B23
	HP Rack 10622 (22U) – Pallet	245163-B21
	HP Rack 10622 (22U) – Shock Pallet	245163-B22
	HP Rack 10622 (22U) – Crated	245163-B23
	NOTE: -B21 (pallet) used to ship empty racks shipped on a truck -B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels) -B23 (crated) used for air shipments of empty racks Not all Compaq equipment is qualified to be shipped in the Rack 10000 series.

	NOTE: Please see the Rack 10000 QuickSpecs for Technical Specifications such as height, width, depth, weight, and color: http://www5.compaq.com/products/quickspecs/10995_div/ 10995_div.HTML (Division/World Wide) http://www5.compaq.com/products/quickspecs/10995_na/ 10995_na.HTML (North America)
	NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.compaq.com/racks


Compaq Rack 9000 Series (Opal)	Compaq Rack 9142 (42U) – Pallet	120663-B21
Compaq Rack 9000 Series (Opal)	Compaq Rack 9142 (42U) – Shock Pallet	120663-B22
	Compaq Rack 9142 (42U) – Crated	120663-B23
	Compaq Rack 9136 (36U) – Pallet	120664-B21
	Compaq Rack 9136 (36U) – Shock Pallet	120664-B22
	Compaq Rack 9136 (36U) – Crated	120664-B23
	Compaq Rack 9122 (22U) – Pallet	120665-B21
	Compaq Rack 9122 (22U) – Shock Pallet	120665-B22
	Compaq Rack 9122 (22U) – Crated	120665-B23
	Compaq Rack 9842 (800mm wide, 42U) - Pallet	222192-B21
	NOTE: -B21 (pallet) used to ship empty racks shipped on a truck -B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels) -B23 (crated) used for air shipments of empty racks

	NOTE: Please see the Rack 9000 QuickSpecs for Technical Specifications such as height, width, depth, weight, and color: http://www5.compaq.com/products/quickspecs/10366_div/ 10366_div.HTML (Division/World Wide) http://www5.compaq.com/products/quickspecs/10366_na/ 10366_na.HTML (North America)
	NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.compaq.com/racks

Rack Options for HP Rack 10000 Series	Rack Blanking Panels – Graphite (Multi) NOTE: Contains one each of 1U, 2U, 3U and 4U panel.	253214-B26
Rack Options for HP Rack 10000 Series	Rack Blanking Panels – Graphite (1U) NOTE: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (1U).	253214-B21
	Rack Blanking Panels – Graphite (2U) NOTE: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (2U).	253214-B22
	Rack Blanking Panels – Graphite (3U) NOTE: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (3U).	253214-B23
	Rack Blanking Panels – Graphite (4U) NOTE: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (4U).	253214-B24
	Rack Blanking Panels – Graphite (5U) NOTE: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (5U).	253214-B25
	800mm Stabilizer Option Kit (Graphite) NOTE: The 800mm Stabilizer Kit (PN 255488-B21) supports the Rack 9842 only.	255488-B21
	600mm Stabilizer Kit – Graphite	246107-B21
	Baying Kit for Rack 10000 series (Carbon)	248929-B21
	42U Side Panel – Graphite Metallic	246099-B21
	110V Fan Kit (Graphite) NOTE: Roof Mount Includes power cord with IEC320-C13 to NEMA 5-15P.	257413-B21
	220V Fan Kit (Graphite) NOTE: Roof Mount Includes power cord with IEC320-C13 to NEMA 6-15P.	257414-B21
	36U Side Panel – Graphite Metallic	246102-B21
	47U Side Panel – Graphite Metallic	255486-B21
	9000/10000 Series Offset Baying Kit (42U) NOTE: This kit can be used to connect 9000 and 10000 series racks of the same height together. Kit contents include hardware for connecting racks and a panel to cover the 100mm gap at the rear of the two racks.	248931-B21
	NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.compaq.com/racks

Rack Options for Compaq Rack 9000 Series	Baying/Coupling Kit	120669-B21
Rack Options for Compaq Rack 9000 Series	42U Side Panel NOTE: The 42U Side Panel (PN 120670-B21) supports the Compaq Rack 9142 and Compaq Rack 9842.	120670-B21
	36U Side Panel NOTE: The 36U Side Panel (PN 120671-B21) supports the Compaq Rack 9136.	120671-B21
	600mm Stabilizer Option Kit	120673-B21
	800mm Stabilizer Option Kit (Opal) NOTE: The 800mm Stabilizer Kit (PN 234493-B21) supports the Rack 9842 only	234493-B21
	Grounding Rack Option Kit	120682-B21
	Stabilizer Option Kit	120673-B21
	Rack Blanking Panel (Multi) NOTE: Kit includes four panels in 1U, 2U, 4U, and 8U.	169940-B21
	9142 Extension Kit NOTE: The 9142 Extension Kit (PN 120679-B21) supports the Compaq Rack 9142 only.	120679-B21
	Rack Blanking Panels (1U) NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (1U).	189453-B21
	Rack Blanking Panels (2U) NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (2U).	189453-B22
	Rack Blanking Panels (3U) NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (3U).	189453-B23
	Rack Blanking Panels (4U) NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (4U).	189453-B24
	Rack Blanking Panels (5U) NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (5U)	189453-B25
	9136 Extension Kit	218216-B21
	9142 Short Rear Door NOTE: The 9142 Short Rear Door (PN 218217-B21) supports the Compaq Rack 9142 only.	218217-B21
	Split Rear Door (Opal) NOTE: The Split Rear Door (PN 254045-B21) supports the 600 mm wide, 42U 9000 series rack.	254045-B21
	9136 Short Rear Door	218218-B21
	9142 Split Rear Door	254045-B21
	9000/10000 Series Offset Baying Kit NOTE: This kit can be used to connect 9000 and 10000 series racks in 42U height together. Kit contents include hardware for connecting racks and a panel to cover the 100mm gap at the rear of the two racks.	248931-B21
	NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.compaq.com/racks

Rack Options for Compaq Rack 7000 Series and Telco racks	High Air Flow Rack Door Insert for 7122	157847-B21
	High Air Flow Rack Door Insert for 7142 (single)	327281-B21
	High Air Flow Rack Door Insert for 7142 (6-pack)	327281-B22
	Networking Cable Management Kit	292407-B21
	Rack Extension Kit for 7142	154392-B21
	NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.compaq.com/racks

Rack Options for Rack 10000, 9000 and 7000 Series	Monitor Utility Shelf	303606-B21
Rack Options for Rack 10000, 9000 and 7000 Series	Ballast Option Kit	120672-B21
	100kg Sliding Shelf	234672-B21
	Rack Rail Adapter Kit (25² depth)	120675-B21
	Monitor/Utility Shelf - Graphite	253449-B21
	Depth Adjustable Fixed Rail	332558-B21
	Cable Management D-Rings Kit	168233-B21
	Console Management Controller (CMC) Option Kit	203039-B21
	Console Management Controller (CMC) Sensors Option Kit	203039-B22
	Console Management Controller (CMC) Locking Option Kit	203039-B23
	Console Management Controller (CMC) Smoke Sensor Option Kit	203039-B24
	NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.compaq.com/racks

Rack Options	Bus Bar Telco Rail Option Kit	245249-B21
Rack Options	Enclosure Telco Rail Option Kit	266076-B21
	ProLiant BL p-Class Enclosure Shipping Bracket Option Kit (used to secure 1 server blade enclosure or 1 power enclosure in a rack when moving)	293121-B21

Service and Support Offerings (CarePaq Services)	Hardware Services 4-Hour On-site Service
Service and Support Offerings (CarePaq Services)	3 yrs, 9x5, on-site hardware maintenance with a 4-hour response for a fully configured ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server blades, power enclosure with power supplies and power distribution. (6-3 part number for US)	274369-002
	3 yrs, 9x5, on-site hardware maintenance with a 4-hour response for a fully configured ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server blades, power enclosure with power supplies and power distribution. (6-3 part number for EMEA)	207266-022
	3 yrs, 24x7, on-site hardware maintenance with a 4-hour response for a fully configured ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server blades, power enclosure with power supplies and power distribution. (6-3 part number for US)	274370-002
	3 yrs, 24x7, on-site hardware maintenance with a 4-hour response for a fully configured ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server blades, power enclosure with power supplies and power distribution. (6-3 part number for EMEA)	207267-022
	3 yrs, 9x5, on-site hardware maintenance with a 6-hour repair time for a fully configured ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server blades, power enclosure with power supplies and power distribution. (6-3 part number for EMEA)	207268-022
	3 yrs, 24x7, on-site hardware maintenance with a 6-hour repair time for a fully configured ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server blades, power enclosure with power supplies and power distribution. (6-3 part number for EMEA)	207269-022
	3 yrs, 9x5, on-site hardware maintenance with a 4-hour response for a fully configured ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server blades, power enclosure with power supplies and power distribution. Electronic CarePaq service. (6-3 part number for US)	302329-001
	3 yrs, 9x5, on-site hardware maintenance with a 4-hour response for a fully configured ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server blades, power enclosure with power supplies and power distribution. Electronic CarePaq service. (6-3 part number for EMEA)	207266-021
	3 yrs, 24x7, on-site hardware maintenance with a 4-hour response for a fully configured ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server blades, power enclosure with power supplies and power distribution. Electronic CarePaq service. (6-3 part number for US)	302330-001

	3 yrs, 24x7, on-site hardware maintenance with a 4-hour response for a fully configured ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server blades, power enclosure with power supplies and power distribution. Electronic CarePaq service. (6-3 part number for EMEA)	207267-021
	3 yrs, 9x5, on-site hardware maintenance with a 6-hour repair time for a fully configured ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server blades, power enclosure with power supplies and power distribution. Electronic CarePaq service. (6-3 part number for EMEA)	207268-021
	3 yrs, 24x7, on-site hardware maintenance with a 6-hour repair time for a fully configured ProLiant BL p-Class server blade enclosure with interconnects and up to 8 server blades, power enclosure with power supplies and power distribution. Electronic CarePaq service. (6-3 part number for EMEA)	207269-021
	Installation & Start-up Services
	Install ProLiant BL p-Class server blade enclosure including up to 8 ProLiant BL p-Class server blades and interconnects, power enclosure with power supplies and power distribution. (6-3 part number for US)	274371-002
	Install ProLiant BL p-Class server blade enclosure including up to 8 ProLiant BL p-Class server blades and interconnects, power enclosure with power supplies and power distribution. Electronic CarePaq service. (6-3 part number for US)	302331-001
	Provides for the Installation and Start-up of Rapid Deployment Pack on a Customer supplied server designated as a Deployment Server. Includes the deployment of a single server. This new server will be deployed using either one of the pre-configured scripts or an image. In addition, the service will provide for the capture and storage of the configuration of the newly deployed server and orientation on product usage. To be delivered during standard office ours, standard office days. (6-3 part number for US)	274545-002
	Provides for the Installation and Start-up of Rapid Deployment Pack on a Customer supplied server designated as a Deployment Server. Includes the deployment of a single server. This new server will be deployed using either one of the pre-configured scripts or an image. In addition, the service will provide for the capture and storage of the configuration of the newly deployed server and orientation on product usage. To be delivered during standard office ours, standard office days. (6-3 part number for EMEA)	204601-022
	Provides for the Installation and Start-up of Rapid Deployment Pack on a Customer supplied server designated as a Deployment Server. Includes the deployment of a single server. This new server will be deployed using either one of the pre-configured scripts or an image. In addition, the service will provide for the capture and storage of the configuration of the newly deployed server and orientation on product usage. To be delivered during standard office ours, standard office days. Electronic CarePaq service. (6-3 part number for EMEA)	204601-021
	NOTE: For more information, customer/resellers can contact http://www.compaq.com/services.

Memory

ProLiant BL20p Server Blade (2P Model) (not available in NA)

Standard Memory
1024-MB PC133 MHz Registered ECC SDRAM DIMM installed (2 x 512-MB SDRAM DIMM)

Standard Memory Plus Optional Memory
Up to 3072-MB of SDRAM DIMM memory is available with the installation of optional SDRAM DIMM memory expansion kits.

Standard Memory Replaced with Optional Memory
Up to 4096-MB of SDRAM DIMM memory is available with the removal of standard memory and the installation of optional SDRAM DIMM memory expansion kits.

Memory		Slot
		1	2	3	4
Standard	1024 MB	512 MB	512 MB	Empty	Empty
Optional	3072 MB	512 MB	512 MB	1024 MB	1024 MB
Maximum	4096 MB	1024 MB	1024 MB	1024 MB	1024 MB


Following are memory options available from Compaq:
2048-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 1024 MB)	201695-B21
1024-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 512 MB)	201694-B21
512-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 256 MB)	201693-B21
256-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 128 MB)	201692-B21

ProLiant BL20p Server Blade (1P Model)
Standard Memory 512-MB PC133 MHz Registered ECC SDRAM DIMM installed (2 x 256-MB SDRAM DIMM) Standard Memory Plus Optional Memory Up to 2560-MB of SDRAM DIMM memory is available with the installation of optional SDRAM DIMM memory expansion kits. Standard Memory Replaced with Optional Memory Up to 4096-MB of SDRAM DIMM memory is available with the removal of standard memory and the installation of optional SDRAM DIMM memory expansion kits.

Memory		Slot
		1	2	3	4
Standard	512 MB	256 MB	256 MB	Empty	Empty
Optional	2560 MB	256 MB	256 MB	1024 MB	1024 MB
Maximum	4096 MB	1024 MB	1024 MB	1024 MB	1024 MB


Following are memory options available from Compaq:
2048-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 1024 MB)	201695-B21
1024-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 512 MB)	201694-B21
512-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 256 MB)	201693-B21
256-MB PC133MHz Registered ECC SDRAM Memory Kit (2 x 128 MB)	201692-B21

TechSpecs

Compaq ProLiant BL p-Class Server Blade Enclosure

Dimensions

Height

10.5 in/26.67 cm

Width

17.60 in/44.70 cm

Depth

28.86 in/73.30 cm

Input Specifications

Rated input voltage

-43 VDC to -53 VDC

Nominal -48 VDC

Rated input current

62.5 A at -48 VDC

Rated input Power

3000 W

Individual server blade bay ratings

Rated input voltage

-43 VDC to -53 VDC

Nominal -48 VDC

Rated input current

6.25 A at -48 VDC

Rated input Power

300 W

Temperature range

Operating

50° to 95° F/10° to 35° C

Non-Operating

-22° to 140° F/-30° to 60° C

Relative humidity
(non-condensing)

Operating

20% to 80%

Non-Operating

5% to 95%

Wet bulb temperature

Operating

82.4° F/28° C

Non-Operating

101.7° F/38.7° C

NOTE: Operating temperature has an altitude derating of 34° F/1° C per 1,000 ft/304.8 m. No direct sunlight. Upper operating limit is 10,000 ft/3,048 m or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft/9,144 m or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of
113° F/45° C. Altitude maximum for storage is 70 KPa.

Operating and Performance Specifications for ProLiant BL20p Server Blade

Dimensions

Height

1.69 in/4.29 cm

Width

10.29 in/26.14 cm

Depth

28.00 in/71.12 cm

Weight (maximum)

18.0 lb/8.17 kg

Temperature range

Operating

50° to 95° F/10° to 35° C

Non-operating

Shipping

-40° to 140° F/-40° to 60° C

Storage

-4° to 140° F/-20° to 60° C

Relative humidity
(non-condensing)

Operating

10% to 90%

Non-operating

Shipping

10% to 90%

Storage

10% to 95%

Maximum wet bulb temperature

82° F/28° C

Operating and Performance Specifications for RJ-45 Patch Panel

Dimensions

Height

10.405 in/26.43 cm

Width

1.535 in/3.899 cm

Depth

27.697 in/70.35 cm

Capability

IEEE 802.2, 802.3, 802.3u

Network transfer rate

10 Base-T (half-duplex)

10 Mbps

10 Base-T (full-duplex)

20 Mbps

100 Base-TX (half-duplex)

100 Mbps

100 Base-TX (full-duplex)

200 Mbps

1000 Base-TX (full-duplex)

1000 Mbps

Connector

RJ-45

Cable support

10 Base-TX

Categories 3, 4, or 5 UTP (2 or 4 pair); up to 328 ft/100 m

100 Base-TX

Category 5 UTP (2 pair); up to 328 ft/100 m

1000 Base-TX

Category 5E (4 pair); up to 328 ft/100 m

Power requirements

200 mA at + 5V DC; 500 mA at -48V

Temperature range

Operating

50° to 95° F/10° to 35° C

Non-operating

-22° to 140° F/-30° to 60° C

Relative humidity (non-condensing)

Operating

20% to 80%

Non-operating

5% to 95%

Wet bulb temperature

Operating

82.4° F/28° C

Non-operating

101.7° F/38.7° C

Operating and Performance Specifications for Interconnect GbE Switch

Dimensions

Height

10.405 in/26.43 cm

Width

1.535 in/3.899 cm

Depth

27.697 in/70.35 cm

Weight

11.5 lb/5.2 kg per interconnect switch

Performance

3.2 Gbps Switching bandwidth per server enclosure

4.4 Gbps uplink bandwidth per server enclosure

9.6 Million pps aggregate throughput per server enclosure (64-byte packets)

Full-wire speed for all connections

Auto-negotiation and auto-sensing with full-duplex support

Forwarding mode

Store and forward

MAC Addresses

8,191 per interconnect switch; MAC address based filtering and MAC address packet priority configuring

Forwarding table age time

Maximum age: 10 to 9999 seconds; default: 3000 seconds

Memory

32MB Main, 6MB flash and 16MB packet buffer per interconnect switch

Compliance

IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.1D, 802.1p, 802.3ac, 802.3ad (Static), 802.1Q, and 802.3x

SNMP v1 (RFC 1157) and RMON v1 (RFC 1757) groups 1, 2, 3, and 9

MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface MIB (RFC 2233), 801.1Q MIB (RFC 2684), RMON1 MIB (RFC 1757) groups 1, 2, 3, and 9, and Ethernet MIB (RFC1643)

Network transfer rate

10 Base-T (half-duplex)

10 Mbps

10 Base-T (full-duplex)

20 Mbps

100 Base-TX (half-duplex)

100 Mbps

100 Base-TX (full-duplex)

200 Mbps

1000 Base-TX (half-duplex)

1000 Mbps

1000 Base-TX (full-duplex)

2000 Mbps

1000 Base-SX (full-duplex)

2000 Mbps

Connector

RJ-45, DB-9 (C-GbE Interconnect Kit)
LC fiber, RJ-45, DB-9 (F-GbE Interconnect Kit)

EMI

FCC Class A

ICES-003 Class A

AS/NZS 3548 Class A

VCCI Class A

Safety

UL/CUL Listed Accessory

Power requirements

48V: 1050 mA, 50 W maximum (per interconnect switch)

Temperature range

Operating

50° to 95° F/10° to 35° C

Non-operating

-22° to 140° F/-30° to 60° C

Relative humidity
(non-condensing)

Operating

20% to 80%

Non-operating

5% to 95%

Wet bulb temperature

Operating

82.4° F/28° C

Non-operating

101.7° F/38.7° C

Operating and Performance Specifications for Power Enclosures (North America/Japan)

Single-Phase Model

Three-Phase Model

Dimensions

Height

5.25 in/13.34 cm

Width

17.60 in/44.7 cm

Depth

27.15 in/68.96 cm

Weights

No hot-plug power supplies

47.5 lb/21.55 kg

All hot-plug power supplies

99.5 lb/45.13 kg

125.5 lb/56.93 kg

Input requirements

Rated input voltage

200 VAC to 240 VAC

200 VAC to 240 VAC line to line

Rated input frequency

50 Hz to 60 Hz

Rated input current per side

24A

24A per phase

Rated input power per side

5760 W

9976 W

Power cord

1 NEMA L6-30P per side

1 NEMA L15-30 per side

Output voltage specifications

Rated output voltage

-48.8 VDC to -54 VDC

Rated output current

99A

170A

Rated output power

4298 W

8310 W

Nominal power

4158 W at 208 VAC

7202 W at 208 VAC

Ambient temperature range (See NOTE)

Operating

50° to 95° F/10° to 35° C

Shipping

-22° to 140°F/-30° to 60°C

Relative humidity,
non-condensing
(See NOTE)

Operating

20% to 80%

Non-operating

5% to 95%

Wet bulb temperature

Operating

82.4° F/28° C

Non-operating

101.7° F/38.7° C

Operating and Performance Specifications for Power Enclosures (International)

Single-Phase Model

Three-Phase Model

Dimensions

Height

5.25 in/13.34 cm

Width

17.60 in/44.7 cm

Depth

27.15 in/68.96 cm

Weights

No hot-plug power supplies

47.5 lb/21.55 kg

All hot-plug power supplies

99.5 lb/45.13 kg

125.5 lb/56.93 kg

Input requirements

Rated input voltage

200 VAC to 240 VAC

6.25 A at -48 VDC

200 VAC to 240 VAC line to neutral

Rated input frequency

50 Hz to 60 Hz

Rated input current per side

24A

20A per phase

Rated input power per side

5760 W

10,552 W

Power cord

1 IEC 309 3-pin, 32A per side

1 IEC 309 5-pin, 32A per side

Output voltage specifications

Rated output voltage

-48.8 VDC to -54 VDC

Rated output current

99A

180A

Rated output power

4798 W

8790 W

Nominal power

4598 W at 208 VAC

8790 W at 230 VAC L-N

Ambient temperature range (See NOTE)

Operating

50° to 95° F/10° to 35° C

Shipping

-22° to 140°F/-30° to 60°C

Relative humidity,
non-condensing
(See NOTE)

Operating

20% to 80%

Non-operating

5% to 95%

Wet bulb temperature

Operating

82.4° F/28° C

Non-operating

101.7° F/38.7° C

Operating and Performance Specifications for Power Distribution Devices

Power Bus Box

Mini Bus Bar

Scalable Bus Bar

Power enclosures or facility DC feeds supported
(3U each)

Server blade enclosures supported (6U each)

Total rack height of supported enclosures

21U

36U

Dimensions

Height

5.1 in/12.95 cm

19.45 in/49.40 cm

48.57 in/123.37 cm

Width

3.6 in/9.14 cm each

19.74 in/50.14 cm

Depth

3.25 in/8.26 cm

2.2 in/5.59 cm

Weight

3.62 lb/1.64 kg

13.2 lb/59.9 kg

26 lb/11.79 kg

Rated operating voltage

-43.2 VDC to -54 VDC

Max total power supported

3000 W

9000 W

15,000 W

Total max input current at minimum voltage

69.44 A at -43.2VDC

208.32 A at -43.2 VDC

347.2 A at -43.2 VDC
(equivalent of 175A per feed)

Total max input current at nominal voltage

62.5 A at -48VDC

187.5 A at -48 VDC

312.5 A at -48 VDC
(equivalent of 175A per feed)

Max current per power feed

70A

210A

Max local ambient temperature

149° F/65° C

NOTE: All systems support redundant A & B feeds. Scalable bus bar supports dual A and dual B feeds.

Operating and Performance Specifications for Facility DC

Voltage

Nominal input voltage

-48 VDC

Operating voltage range

-48VDC ± 10% or -43.2 VDC to -52.8 VDC

Max Input voltage slew rate

0.5V/uS

Redundant feed voltages*
(A & B)

*A and B feeds must differ by no more than 5VDC during steady state operation

Ripple/Noise

480 mV PARD**

Overshoot

Must remain within regulation limits on all feeds during startup or shutdown

Voltage transients

Must not exceed -60 VDC

Current

Max steady state input current

62.5A per server blade enclosure installed at -48VDC

Max steady state current per feed/total

Power bus boxes

70 A/70A

Mini bus bars

210 A/210A

Scalable bus bars

210 A/350A or equivalent of 175A per feed*

In-rush current

Must support up to 2X the maximum operating current per server blade enclosure (125 A) for up to 1.0 mS

Input over-current

Customer provided fusing for facility DC feeds that protects the system from catastrophic over-current within 20 uS. Fuse should sustain all in-rush and operating currents.

Max Input Current Slew Rate

1A/uS

Max Rated Power

3000W per server blade enclosure

Connections and Cables

HP provided facility DC cable connection kit:

The facility DC connection kit supports the connection of up to four -48VDC, RETURN pairs and ground.

The power cable assemblies consist of 1/0AWG, color-coded, flexible cable rated at 105° C, terminated with bus mating connectors at one end and unterminated at the other end. The cable length provided enables the customer to route to a fuse panel within or adjacent to the rack.

NOTE: *All systems support redundant A and B feeds. Scalable bus bars support dual A and dual B feeds.
** Periodic and random noise (PARD). Maximum allowable peak-to-peak ripple and noise (as measured at the load on any output channel). The ripple and noise is measured over a 20 Hz to 100 MHz frequency band. A resistive load (non-electronic) is used for this measurement. Each output is by-passed to return by a 10uF tantalum capacitor with an ESR less than 100 milli-Ohms in parallel with a 0.47 uF ceramic capacitor, at the point of load. The load cable is 12 feet of twisted wire capable of carrying the current. The printed wiring board assembly is installed in its enclosure for this measurement, or the measurement leads are properly shielded with Earth grounds applied to the insert.

Hewlett-Packard, the Hewlett-Packard logo, CarePaq, Insight Manager, OpenVMS, ProLiant, StorageWorks, SmartStart, and Tru64 are trademarks of Hewlett-Packard Company in the U.S. and/or other countries. Microsoft, Microsoft.Net, and Windows are registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Intel and Pentium are registered trademarks or trademarks of Intel Corporation in the U.S. and/or other countries. Linux is a registered trademark or trademark of Linus Torvalds in the U.S. and/or other countries. Red Hat is a registered trademark or trademark of Red Hat Inc., in the U.S., and other countries. All other product names mentioned herein may be trademarks of their respective companies.

Hewlett-Packard shall not be liable for technical or editorial errors or omissions contained herein. The information is provided "as is" without warranty of any kind and is subject to change without notice. The warranties for Hewlett-Packard products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty.

DA-11411 - World Wide - Version 10 - March 13, 2003