This desktop media converter features 100TX to 100FX conversion with multi-mode ST fiber connector supporting a distance up to 2km. At just 1.25 inches wide × 3.6 inches deep × 0.85 inches high, this media converter can easily fit into the palm of a hand.

Specification

Product
Product id	882217
Brand	Allied Telesis
Partnr	DMC100/ST-30
EAN/UPC code	767035206660
Network
Maximum data transfer rate	100 Mbit/s
Converter input interface	100Base-TX
Converter output interface	100Base-FX
Networking standards	IEEE 802.1Q
Ethernet interface type	Fast Ethernet
Data transfer rate	100 Mbit/s
Packet forwarding rate (10 Mbps)	14880 pps
Packet forwarding rate (100 Mbps)	148800 pps
Packet forwarding rate (1 Gbps)	1488000 pps
VLAN support	Y
Auto MDI/MDI-X	Y
Duplex system	Full, Half
Ports & interfaces
Connectivity technology	Wired
Fiber optic connector	ST
Performance
Maximum transfer distance	2000 m
Wavelength	1310 nm
Fiber mode structure	Multi-mode
Fiber cable diameters supported (core/cladding)	50/125, 62.5/125 µm
Tx power (min)	-22.5 dBmW
Tx power (max)	-14 dBmW
Rx power (min)	-32 dBmW
Design
Internal	Y
Product colour	Grey
LED indicators	Y
Power
Power consumption (typical)	1.5 W
Weight & dimensions
Width	31.8 mm
Depth	91.4 mm
Height	21.6 mm
Weight	113 g
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 65 °C
Operating relative humidity (H-H)	5 - 95 procent
Storage relative humidity (H-H)	5 - 95 procent
Operating altitude	0 - 3048 m