Cisco® Catalyst® 2960 Series Switches with LAN Lite software are fixed-configuration, standalone switches that provide desktop Fast Ethernet connectivity for entry-level wiring closet and small branch-office networks. These switches simplify the migration from nonintelligent hubs and unmanaged switches to a fully scalable managed network. The LAN Lite Cisco IOS® Software provides entry-level security, quality of service (QoS), and availability capabilities while lowering the network total cost of ownership.

The Cisco Catalyst 2960 LAN Lite Switches offer:
-Dual-purpose uplinks for Gigabit Ethernet uplink flexibility, allowing use of either a copper or a fiber uplink; each dual-purpose uplink port has one 10/100/1000 Ethernet port and one Small Form-Factor Pluggable (SFP)-based Gigabit Ethernet port, with one port active at a time.
-Scalable and secure network management.
-Baseline Network Admission Control based on users, ports, and MAC addresses.
-Easy network configuration, Cisco IOS Software updates, and troubleshooting using Cisco Network Assistant software.
-QoS for traffic classification and shaping to prioritize various applications.
-Single IP address, syslog, and Simple Network Management Protocol (SNMP) management for a stack of up to 16 switches.
-Autoconfiguration using Smartports.
-Enhanced troubleshooting for link connectivity problems and cable diagnostics.
-QoS and support for multicast services.
-Software updates at no additional cost.

Specification

Product
Product id	274941
Brand	Cisco Systems
Partnr	WS-C2960-48PST-S
EAN/UPC code	882658602214
Warranty (months)	Limited lifetime hardware warranty
Data transmission
Maximum data transfer rate	1 Gbit/s
Supported data transfer rates	10/100/1000 Mbps
Jumbo frames support	Y
Network
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ah, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Full duplex	Y
DHCP server	Y
DHCP client	Y
Auto MDI/MDI-X	Y
Spanning tree protocol	Y
Broadcast storm control	Y
Link aggregation	Y
Management features
Switch type	Managed
Switch layer	L2
Quality of Service (QoS) support	Y
Protocols
Management protocols	SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP
Data link protocols	Ethernet, Fast Ethernet
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity	52, 48, 52
Gigabit Ethernet (copper) ports quantity	2
SFP slots quantity	2
Security
IGMP snooping	Y
MAC address filtering	Y
SSH/SSL support	Y
Weight & dimensions
Dimensions (WxDxH)	445 x 332 x 44 mm
Weight	5400 g
Power
Power consumption (typical)	262 W
Multicast features
Multicast support	Y
Endurance
Mean time between failures (MTBF)	181979 uur
Certificates
Electromagnetic emissions	FCC Part 15 Class A, EN 55022 Class A (CISPR22), EN 55024 (CISPR24), AS/NZS CISPR22 Class A, CE, CNS13438 Class A, MIC, GOST
Design
Stackable	Y
Safety	UL 60950-1, CUL - CAN/CSA 22.2 No. 60950-1, TUV/GS - EN 60950-1, CB - IEC 60950-1, CE Marking, NOM
Operational conditions
Operating altitude	0 - 4000 m
Non-operating altitude	0 - 4000 m
Operating temperature (T-T)	23 - 113 °F
Heat dissipation	899 BTU/h
Storage relative humidity (H-H)	10 - 85 procent
Operating temperature (T-T)	-5 - 45 °C
Operating relative humidity (H-H)	10 - 85 procent
Performance
Memory type	RAM
Internal memory	64 MB
Flash memory	32 MB
Noise level	48 dB
Power over Ethernet (PoE)
Power over Ethernet (PoE)	Y
Other features
Connectivity technology	Wired
Bandwidth	16 Gbit/s
Connectivity LEDs	Y
Authentication method	RADIUS, TACACS+, SSH2
Wi-Fi	N