WINDFORCE 2X COOLING SYSTEM
The WINDFORCE 2X cooling system features 2x 90mm unique blade fans, alternate spinning fan, 3 composite copper heat pipes, heat-pipe direct touch and 3D active fan functionality, together delivering an effective heat dissipation capacity for higher performance at lower temperatures.

ALTERNATE SPINNING
The GIGABYTE “Alternate Spinning” is the only solution that can solve the turbulent airflow of adjacent fans. Since the adjacent fans rotate in the same direction, the airflow direction is opposite between the fans, which will cause turbulent airflow and reduce heat dissipation efficiency. GIGABYTE turns the adjacent fans in the opposite direction, so that the airflow direction between the two fans is the same, reducing the turbulence and enhancing the airflow pressure.

UNIQUE BLADE FAN
The airflow is spilt by the triangular fan edge, and guided smoothly through the 3D stripe curve on the fan surface, effectively enhancing the airflow.

3D ACTIVE FAN
The 3D Active Fan provides semi-passive cooling, and the fans will remain off when the GPU is in a low load or low power game. It allows gamers to enjoy gameplay in complete silence when the system is running light or idle.

HEAT PIPES DIRECT TOUCH GPU
The shape of the pure copper heat pipes maximize the direct contact area with the GPU, enhancing heat transfer. The heat pipes also cover the VRAM through a large metal plate contact to ensure proper cooling.

COMPOSITE HEAT-PIPE
The composite heat-pipe combines thermal conductivity and phase transition to efficiently manage the heat transfer between two solid interfaces which increases cooling capacity.

BUILT STRONG

EXTREME DURABILITY AND OVERCLOCKING
The graphics card uses the better power phases design to allow the MOSFET to operate at lower temperature, and over-temperature protection design and load balancing for each MOSFET, plus the Ultra Durable certified chokes and capacitors, to provide excellent performance and longer system life.

PCI-E 4.0 SUPPORT
Gigabyte Radeon RX 5500 XT OC features PCI-Express 4.0 support, with a throughput of 16 GT/s and enables two times the bandwidth compared to PCI Express 3.0. With the PCI-Express 4.0 supported motherboard, and get ready for the next generation of PC gaming.

FRIENDLY PCB DESIGN
Fully automated production process ensures top quality of the circuit boards and eliminates sharp protrusions of the solder connectors seen on the conventional PCB surface. This friendly design prevents your hands from getting cut or inadvertently damaging components when making your build.

PROTECTION BACK PLATE
The back plate not only provides an aesthetical shape, but also enhances the structure of the graphics card to provide complete protection.

IN TOTAL COMMAND
The interface and functionality of the software is subject to each model.

AORUS ENGINE
The cutting edge intuitive interface allows you to adjust the clock speed, voltage, fan performance and power target in real-time according to your game’s requirements.

Specification

Product
Product id	671233
Brand	Gigabyte
Partnr	GV-R55XTOC-4GD
EAN/UPC code	4719331306427
Processor
Graphics processor family	AMD
Graphics processor	Radeon RX 5500 XT
Maximum resolution	7680 x 4320 Pixels
CUDA	N
Processor frequency	1647 MHz
Processor boost clock speed	1845 MHz
Maximum displays per videocard	4
Stream processors	1408
Memory
Discrete graphics adapter memory	4 GB
Graphics adapter memory type	GDDR6
Memory bus	128 Bit
Memory clock speed	14000 MHz
Memory bandwidth (max)	224 GB/s
Ports & interfaces
Interface type	PCI Express x16 4.0
HDMI ports quantity	1
DisplayPorts quantity	3
HDMI version	2.0b
DisplayPort version	1.4
Performance
DirectX version	12.0
OpenGL version	4.6
Dual Link DVI	N
AMD FreeSync	Y
Design
Cooling type	Active
Number of fans	2 ventilator(en)
Fan diameter	90 mm
Bracket height	Full-Height (FH)
Form factor	Full-Height/Full-Length (FH/FL)
Product colour	Black
Power
Minimum system power supply	450 W
Supplementary power connectors	1x 8-pin
Weight & dimensions
Depth	225 mm
Height	40 mm
Width	119 mm