The HP 366M is a PCIe 2.1 quad-port 1Gb Ethernet mezzanine network adapter for select HP ProLiant BladeSystem c-Class Gen8 servers. Based on the bridgeless Intel® I350 controller, it is the follow-on adapter to the HP NC364m. The total aggregate throughput of 4Gbps meets the needs of customers wanting high bandwidth but not yet ready to move to 10 Gigabit Ethernet. Support for VMware NetQueue, Microsoft VMQ, and Intel VMDq meets the performance demands of consolidated virtual workloads. Other features supported on the HP 366M include RSS, PXE, checksum offload, VLAN, jumbo frames, iSCSI acceleration and iSCSI remote boot.

First quad-port 1GbE mezzanine adapter for HP BladeSystem Gen8 servers offers network port density.
New bridgeless quad-port design with PCIe 2.1 support offers greater throughput for I/O intensive applications like virtualization, firewall and other security, network segmentation, and other bandwidth hungry applications. Total aggregate throughput of 8 Gbps full duplex meets the needs for customers who need high bandwidth but are not yet ready to move to 10 Gigabit Ethernet. Intel® Integrated I/O with Data Direct I/O reduces system power, increases I/O performance, and reduces latency, while DMA Coalescing enables the adapter to remain in a low power state for a long time. Virtualization is optimized by support for VMware NetQueue, Microsoft VMQ, Intel VMDq, and VLAN support with eight queues per port and port partitioning. Advanced features like PXE boot, jumbo frames, VLAN support, and RSS increase network performance.

Specification

Product
Product id	391940
Brand	Hewlett Packard Enterprise
Partnr	615729-B21
EAN/UPC code	885631274361
Ports & interfaces
Connectivity technology	Wired
Host interface	PCI Express
Interface	Ethernet
Ethernet LAN	Y
Ethernet LAN (RJ-45) ports	4
Network
Maximum data transfer rate	2000 Mbit/s
Networking standards	IEEE 1588, IEEE 802.1as, IEEE 802.1p, IEEE 802.1Q, IEEE 802.3, IEEE 802.3ad, IEEE 802.3x
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Cabling technology	10/100/1000BaseT(X)
Full duplex	Y
Design
Internal	Y
Power
Power consumption (typical)	3.1 W
Weight & dimensions
Width	57.2 mm
Depth	241.3 mm
Height	190.5 mm
Weight	450 g