Introducing a new Gigabit, Multi-Gigabit and 10-Gigabit Smart Managed Pro Switch Family for future-proof deployments
Businesses need to be ready for future expansion: with incoming new multispeed devices, their wired network needs to expand its reach and scope to support speeds greater than 1 Gigabit. The IEEE 802.3bz standard paved the way for new 2.5 Gigabit and 5 Gigabit speeds in addition to legacy 1 Gigabit and 10 Gigabit per second. New servers, workstations, storage devices, and motherboards are coming with 802.3bz (NBASE-T) Multi-Gigabit Ethernet for 2.5X to 5X faster speeds up to 100 meters (323 feet) on legacy CAT5e / CAT6 cables.

That is why NETGEAR launched its new Multi-Gigabit Smart Managed Pro Switches with 10G Copper/Fiber Uplinks. Each port automatically detects which speed is needed by the connected device and provides the adequate speed. As opposed to regular 10-Gigabit switches that will only provide 1-Gigabit connectivity to any device that require less than 10-Gigabit, the MS510TX and MS510TXPP give the exact speed required, with no downgrade. Also, the new NETGEAR Multi-Gigabit switch ports can connect regular CAT5e Ethernet cables, without the need to upgrade to CAT6 wiring, therefore reducing wiring costs and hassle.

Access, Aggregation or Collapsed Core: You can now have your PCs, printers and routers/firewalls connected at 1G and aggregate Multi-Gigabit Ethernet new devices on the same switch, all line-rate. 10G copper and fiber ports are ready for local servers and storage, or high-speed aggregation to your network core.

Specification

Product
Product id	580847
Brand	Netgear
Partnr	MS510TXPP-100EUS
EAN/UPC code	606449120967
Warranty (months)	2 Years
Data transmission
MAC address table	16000 entries
Switching capacity	78 Gbit/s
Latency (10 Gbps)	2.36 µs
Jumbo frames support	Y
Jumbo frames	10000
Packet buffer memory	1.5 MB
Network
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
10G support	N
Spanning tree protocol	Y
Broadcast storm control	Y
VLAN support	Y
Number of VLANs	256
Management features
Switch type	Managed
Switch layer	L2/L3/L4
Quality of Service (QoS) support	Y
ARP inspection	Y
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity	8
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Console port	RJ-45
USB 2.0 ports quantity	1
Power connector	DC-in jack
Security
DHCP features	DHCP server, DHCP client
Access Control List (ACL)	Y
Access Control List (ACL) rules	164
IGMP snooping	Y
Weight & dimensions
Width	328 mm
Depth	169 mm
Height	43 mm
Weight	1420 g
Power
Power consumption (typical)	19.39 W
Power consumption (max)	234.31 W
Multicast features
Multicast support	Y
Multicast MAC address table	512 entries
Endurance
Mean time between failures (MTBF)	376434 uur
Design
Rack mounting	Y
Product colour	Grey
LED indicators	Y
Number of fans	1 ventilator(en)
Safety	IEC 60950-1:2005, A1:2009+A2:2013, EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, 60950.1:2015, GB4943.1-2011, YD/T993-1998; GB/T9254-2008, CNS 14336-1
Certification	EN 55032:2012+AC:2013/CISPR 32:2012, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 55024:2010, VCCI-CISPR 32:2016, AS/NZS CISPR 32:2013, GB4943.1-2011; YD/T993-1998; GB/T9254-2008, 47 CFR FCC, ANSI C63.4:2014, ICES-003:2016, ANSI C63.4:2014, CNS 13438
Operational conditions
Operating altitude	0 - 3000 m
Heat dissipation	799.5 BTU/h
Storage temperature (T-T)	-20 - 70 °C
Storage relative humidity (H-H)	0 - 95 procent
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 90 procent
Performance
Built-in processor	Y
Processor frequency	800 MHz
Noise level	28.8 dB
Power over Ethernet (PoE)
Power over Ethernet (PoE)	Y