Extend HDMI over CAT6 or CAT5e cabling, with RS232 serial and IR controlThis HDBaseT™ extender kit can transmit your 4K HDMI signal up to 115 ft. (35 m) over a single CAT5e or CAT6 cable. At lower resolutions up to 1080p, the extender kit can transmit your signal up to 230 ft. (70 m). Extend video and more with HDBaseTThe extender offers a complete end-to-end video and control solution, using HDBaseT technology to extend not just HDMI, but also DC power, IR and serial control over a single CAT5 cable. By extending so much over just one CAT5 or CAT6 cable, HDBaseT is the clear choice of every integrator and system designer. The added benefit of power over cable means that you’ll only need one power source at one side of your extension - great for extending video and control to areas where power outlets may be limited, such as industrial sites. Serial and IR extension optimizes operation by enabling you to control the video source or display from both the local and remote location. Maximize reliability with HDBaseT certificationThis HDBaseT extender has been certified via the HDBaseT Certification Program. This certification ensures the extender is compliant with HDBaseT technical standards, and maximizes reliability with your HDMI display and video source, by ensuring compliance with their established HDMI ecosystem. Astonishing 4K picture quality at an impressive distanceWith the A/V industry adopting 4K as the new high-resolution video standard, long-range video distribution can be a challenge over standard HDMI cables that become susceptible to signal degradation at 30 feet. This HDBaseT extender can maintain your Ultra HD 4K picture quality - four times the resolution of high-definition 1080p - even at 330 feet away from your video source. Plus, because the extender supports high-definition 1080p and lower resolutions, you can comfortably use this extender to make any video source look great, while future-proofing your setup for 4K implementation. Professional installationHDBaseT technology offers a single-cable installation, so you can integrate this solution seamlessly using your existing CAT5e or CAT6 infrastructure. Both the transmitter and receiver included with this HDBaseT extender kit are mountable, so you can keep the equipment out of sight in an equipment rack, or on a wall. This helps to reduce clutter and ensure a professional installation that doesn't draw your viewers' attention away from the content on your display. It’s perfect for customer-facing displays in bars, restaurants or hotel lobbies. What is HDBaseT?HDBaseT is a standardized, zero-latency video technology that’s revolutionizing HDMI distribution. HDBaseT uses an advanced method of modulation that enables you to distribute uncompressed HDMI audio and video, along with additional signals, over a single Ethernet cable. Offering greater versatility than traditional HDMI extenders, and longer distances than HDMI cables alone, HDBaseT is the clear choice for every integrator and system designer. It can do so much, with just a single cable. The ST121HDBTL is TAA compliant and backed by a 2-year StarTech. com warranty with free lifetime technical support. Note: When using Power over Cable (PoC) to power the transmitter or receiver, it is not recommended to pair the StarTech. com transmitter or receiver with any other HDBaseT hardware. Power over Cable should only be used with the transmitter and receiver that are provided with this extender kit. The StarTech. com Advantage

Specification

Product
Product id	579924
Brand	StarTech.com
Partnr	ST121HDBTL
EAN/UPC code	065030868396
Warranty (months)	2 Years
Features
Type	AV transmitter & receiver
Maximum resolution	4096 x 2160 Pixels
Cable types supported	Cat5e, Cat6
Maximum transfer distance	100 m
Maximum refresh rate	60 Hz
Audio system	Multichannel
Audio output channels	7.1 kanalen
Daisy chain	N
Rubber feet	Y
LED indicators	Status
Supported video modes	720p, 1080p
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 2560 x 1600 (WQXGA), 3840 x 2160, 4096 x 2160
Product colour	Black
HDBaseT certified	Y
Certification	FCC, CE, TAA
Ports & interfaces
Connectivity technology	Wired
RJ-45 input ports	1
RJ-45 output ports	1
Number of HDMI outputs	1
HDMI in	1
RS-232 output ports	1
Remote (IR) input	1
Remote (IR) output	1
RS-232 input ports	1
Serial interface type	RS-232
Power
AC input voltage	100 - 240 V
Operating voltage	12 V
Input current	0.6 A
Output current	1.5 A
Power consumption (typical)	18 W
External power adapter	Y
Power plug type	Type M
Weight & dimensions
Receiver dimensions (W x D x H)	66 x 92 x 27 mm
Receiver weight	452 g
Transmitter dimensions (WxDxH)	66 x 92 x 27 mm
Transmitter weight	452 g
Packaging data
Package width	194 mm
Package depth	281 mm
Package height	70 mm
Package weight	1100 g
Packaging content
AC adapter included	Y
Cables included	LAN (RJ-45)
Included power plug types	ANZ, NA, UK
Mounting brackets included	Y
IR blaster included	Y
IR receiver included	Y
Technical details
Sustainability certificates	RoHS
Logistics data
Master (outer) case width	410 mm
Master (outer) case length	445 mm
Master (outer) case height	320 mm
Quantity per master (outer) case	12 stuk(s)