Connect both an IDE and a SATA 2.5/3.5in hard drive or solid state drive to your computer system using an available USB 3.0 port, with support for UASP for optimal performance

The UNIDOCKU33 USB 3.0 Universal HDD / SSD Dock enables you to instantly access your 2.5 or 3.5in IDE and SATA hard drives through two top loading drive slots, saving you the hassle of mounting the drives into a computer or external enclosure or tray.

Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps), solid state drives (SSD) and hybrid, drives with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller.  See our UASP testing results below for further details.

The slot-loading design holds the SATA and IDE drives upright inside the docks, neatly keeping them off the desk, for convenience and a clutter-free setup. For SATA drives, the HDD can be inserted and connected directly through the designated dock slot, while the IDE drive slot is conveniently positioned near the rear panel 40-pin data and LP4 power connections, making it easy to connect to the dock using the included IDE data and power cables.

A single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously - a convenient solution for migrating data from an IDE drive to a SATA drive or vice versa. The dock can also be used to greatly increase  the storage and backup capabilities of your computer system with support for high capacity drives (tested with up to 6TB 3.5" and 2TB 2.5" drives).

The UNIDOCKU33 is backed by a StarTech. com 2-year warranty and free lifetime technical support.

Improved Performance with UASP

UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.

At the same peak in testing UASP also shows an 80% reduction in required processor resources.

Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled StarTech. com Enclosure, and a SATA III solid state drive.

The StarTech. com Advantage

- Versatile configuration options, with support for IDE and SATA 2.5in and 3.5in drives
- Save time, with file transfers up to 70% faster than traditional USB 3.0 when used with a UASP-supported host
- Hassle-free operation and reduced workspace clutter, with upright slot-loading design

Specification

Product
Product id	486792
Brand	StarTech.com
Partnr	UNIDOCKU33
EAN/UPC code	065030859813
Warranty (months)	2 years
Hard drive
Storage media type	HDD, SSD
Storage drive interface	Parallel ATA (IDE), Serial ATA, Serial ATA II, Serial ATA III
Storage drive sizes supported	2.5, 3.5 "
Number of storage drives supported	2
Maximum storage capacity	6 TB
Ports & interfaces
Host interface	USB 3.2 Gen 1 (3.1 Gen 1) Type-B
DC-in jack	Y
Features
Maximum data transfer rate	5 Gbit/s
Product colour	Black
Material	Plastic
Hot-swap	Y
Plug and Play	Y
RAID support	N
Mean time between failures (MTBF)	30000 uur
UASP support	Y
LED indicators	Activity, Power
Chipset	JMicron - JMS561U, JMD330
Certification	CE, FCC
Cooling
Built-in fan	N
Power
AC input voltage	110-240 V
Input current	1.3 A
Output voltage	12 V
Output current	3 A
Power plug type	Type M
Weight & dimensions
Width	130 mm
Depth	140 mm
Height	70 mm
Weight	512 g
Other features
Standard interfaces	USB 3.2 Gen 1 (3.1 Gen 1)
Operational conditions
Operating temperature (T-T)	5 - 80 °C
Storage temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	8 - 90 procent
Packaging content
AC adapter included	Y
Cables included	USB
Manual	Y
Packaging data
Package dimensions (WxDxH)	120 x 185 x 210 mm
Package width	123 mm
Package depth	187 mm
Package height	214 mm
Package weight	1098 g
Technical details
Sustainability certificates	RoHS